ARBIS Özgeçmişi
Transkript
ARBIS Özgeçmişi
ÖZGEÇMİŞ Prof. Dr. MUSTAFA LUTFİ ÖVEÇOĞLU TC Kimlik No / Pasaport No: 28955167418 Doğum Yılı: 1957 Yazışma Adresi : İstanbul Teknik Üniversitesi, Kimya-Metalurji Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümü 34469 İstanbul/Türkiye Telefon : 212-2853355 Faks : 212-2853427 e-posta : ovecoglu@itu.edu.tr EĞİTİM BİLGİLERİ Ülke Üniversite Fakülte/Enstitü Öğrenim Alanı Derece Mezuniyet Yılı ABD Stanford University MÜHENDİSLİK MALZEME BİLİMİ VE Doktora MÜHENDİSLİĞİ 1987 ABD Stanford University MÜHENDİSLİK MALZEME BİLİMİ VE Yüksek MÜHENDİSLİĞİ Lisans 1984 Orta Doğu Türkiye Teknik Üniversitesi Mühendislik Fakültesi METALURJİ MÜHENDİSLİĞİ Yüksek Lisans 1981 Orta Doğu Türkiye Teknik Üniversitesi Mühendislik Fakültesi METALURJİ VE MALZEME MÜHENDİSLİĞİ Lisans 1979 AKADEMİK/MESLEKTE DENEYİM Kurum/Kuruluş Bölüm/Birim Görev Türü Görev Dönemi Ülke Şehir İstanbul Teknik Üniversitesi Türkiye İstanbul METALURJİ VE MALZEME MÜHENDİSLİĞİ Prof. Dr. 1990- İstanbul Teknik Üniversitesi Türkiye İstanbul METALURJİ VE MALZEME MÜHENDİSLİĞİ Doç. Dr. 19921996 İstanbul Teknik Türkiye İstanbul METALURJİ VE Yrd. Doç. 1990- Üniversitesi MALZEME MÜHENDİSLİĞİ Dr. 1992 Materials Division Yönetici 19881990 Developmental Technologies Co. Hollanda Heerlen Xerox Palo Alto Research Center ABD Palo Alto, Imaging and Electronics CA Laboratories Arge Personel 19871988 Stanford University ABD Palo Alto, MATERIALS SCIENCE CA AND ENGINEERING Araştırma Görevlisi 19841987 Orta Doğu Teknik Üniversitesi Türkiye Ankara Uzman 19801981 BİLGİSAYAR MÜHENDİSLİĞİ UZMANLIK ALANLARI Uzmanlık Alanları Malzeme Bilimi , Metalik Malzemeler , Metalurji ve Malzeme Mühendisliği Toz metalurjisi, Toz malzemeler, Nano malzemeler, Sinterleme, Volfram (W)-esaslı ağır alaşımlar, W ve Al esaslı nanokompozitler, Hızlı katılaştırma, Karakterizasyon, Elektron mikroskobisi, Camseramikler, TeO2-esaslı camlar, TiAl alaşımları PROJE DENEYİMİ Proje Adı Kurum Bütçe Tarih Görev Proje Türü Mekanik Alaşımlama ve Mekanokimyasal Yöntemlerle Üretilen Volfram Esaslı Nanoyapılı ve Nanokompozit Tozlardan Polimer Kompozit ve Sinter Ürünlerin Geliştirilmesi 302591.63 01.09.2005Yürütücü 01.09.2007 Florotellurit Optik Camların Sentezi, Termal Ve Yapısal Analizi 353155 01.10.2006Araştırmacı/Uzman Ulusal 01.10.2008 Mekanik Alaşımlama Yöntemiyle Karbon Nano Tüp Üretimi Ve Alaşımlama 139400 01.11.2007Danışman 01.03.2010 Ulusal Ulusal Parametrelerinin Araştırılması Zno Ve Ag Nano Partikül Ve Nano Fiberlerinin Üretimi Ve Bu Tozlardan Hareketle Antibakteriyel Polimer Matrisli Kompozit Yapıların Enjeksiyon Kalıplama Yöntemiyle Geliştirilmesi 231023 15.02.2008Araştırmacı/Uzman Ulusal 15.08.2010 Fiber Optik Kuvvetlendirici Ve Lazer Uygulamalarında Kullanılan TeO2WO3-CdO Sisteminde Faz Dengelerinin Tespiti Ve Sistemin Termodinamik Optik İncelenmesi 358699 01.06.2008Araştırmacı/Uzman Ulusal 01.12.2010 Kriyojenik Ve Normal Şartlarda Yüksek Enerjili Öğütme Ortamında Mekanik Alaşımlama Ve Aktive Edilmiş Sinterleme Süreçleri Ile Volfram Esaslı Hibrit Kompozitlerin Geliştirilmesi Ve Karakterizasyon Çalışmaları 240000 01.10.2010Yürütücü 01.10.2012 Ulusal 124000 15.07.2009Yürütücü 15.01.2011 Ulusal Elementer Saf Bor Tozunun Ulusal Bor Araştırma Ensitüsü Alternatif Bir Yöntemle Gaz Fazdan Üretilmesi Toz metalurjsi yöntemleriyle aluminyum ve Devlet Planlama bakır esaslı metal Teşkilatı matriks kompozit malzemelerin geliştirilmesi 775000 01.01.2006Yürütücü 31.12.2008 İleri Teknolojiler Araştırma ve Eğitim Programı Devlet Planlama Teşkilatı 38000000 01.01.2001Araştırmacı/Uzman Ulusal 31.12.2009 Erdemir yüksek fırın curuflarından kaplama ve dekoratif amaçlı cam-seramik malzemelerin geliştirilmesi ve Ereğli Demir ve Çelik Fabrikaları T.A.Ş. 14000 15.05.2000Yürütücü 14.11.2001 Ulusal Uludağ şelit konsantrelerinden volfram tozu üretimi ve bunun İstanbul Teknik toz metalurjisi Üniversitesi yöntemleriyle çeşitli ürünlere dönüştürülmesi 895 29.05.1996Yürütücü 29.11.1998 Kurumsal (BAP v.b.) Toz Metalurjisi Yöntemleri İle Nikel - Volfram Kati Eriyik Alaşimi Esasli Kompozitlerin Geliştirilmesi Ve Mikroyapisal Ve Mekanik Özelliklerinin İncelenmesi 24837 01.06.2011Yürütücü 01.06.2012 Ulusal 670000000 01.10.1991Yürütücü 01.05.1994 Ulusal İleri Toz Metalurjisi Yöntemleri ile Antitank Roket Malzemesi İstanbul Teknik Üniversitesi Ulusal Üretimi Toz Metalurjisi Yönrtemleri ile Nikel – Volfram Katı Eriyik Alaşımı Esaslı Kompozitlerin Geliştirilmesi ve Mikroyapısal ve Mekanik Özelliklerinin İncelenmesi İstanbul Teknik Üniversitesi 24500 01.06.2011Yürütücü 01.06.2012 Ulusal Mekanik Alaşımlama ve çeşitli Sinterleme Yöntemleriyle Al(Alüminyum) ve Alİstanbul Teknik Silisyum(Si) Üniversitesi esaslı Nano Kompozit Tozların ve Sinter Kompozitlerin Üretilmesi ve Karakterizasyonu 30000 01.02.2010Yürütücü 01.09.2011 Kurumsal (BAP v.b.) High Temperature Mechanical Properties of Dispersion Strengthened Alloys Stanford University 590000 01.04.1982Bursiyer 01.04.1986 Uluslararası Polysilicon TFT Project Xerox Palo Alto Research Center 160000 01.01.1987Araştırmacı/Uzman Uluslararası 31.12.1987 Utilization of flyash based waste materials for exhaust manifold applications Developmental Technologies B. V. 230000 15.02.1988Araştırmacı/Uzman Uluslararası 01.06.1989 Development of Al-Mg-Si alloys by mechanical alloying and explosive compaction SurMet Impulstechnologien 120000 01.07.1989Araştırmacı/Uzman Uluslararası 01.04.1990 Development and characterization investigations of high performance University of Idaho Powder Metallurgy TiAlbased alloys 370000 01.01.1996Araştırmacı/Uzman Uluslararası 01.01.1999 Çeşitli Uygulama Alanlarina Yönelik Refrakter Metal Borürlerin Üç Farkli Üretim Tekniği Kullanilarak Kati, Sivi Ve Gaz Hammaddelerden Sentezlenmesi, Sinterlenmesi, Karakterizasyonu, Yöntem Ve Ürünlerin Karşilaştirilmasi 480000 15.12.2012Araştırmacı/Uzman Ulusal 15.12.2014 1450000 15.01.2013Yürütücü 15.01.2014 İ. T. Ü. Partikül Malzemeler ve Karakterizasyon Laboratuar Olanakları ile İlişkili Endüstriyel Faaliyetler T. C. Kalkınma Bakanlığı, İstanbul Kalkınma Ajansı (İSTKA) Ulusal DİĞER AKADEMİK FAALİYETLER Son Bir Yılda Uluslararası İndekslere Kayıtlı Makale/Derleme İçin Yapılan Danışmanlık Sayısı 7 Son Bir Yılda Projeler İçin Yapılan Danışmanlık Sayısı 6 Yayınlara Alınan Toplam Atıf Sayısı 711 Tamamlanan Danışmanlık Yapılan Öğrenci Sayısı Devam Eden Yüksek Lisans 39 6 Doktora 6 5 Uzmanlık KONGRE BİLDİRİLER KİTAP Diğer Faaliyetler (Eser/görev/faaliyet/sorumluluk/olay/üyelik EDİTÖRLÜKLERİM : 1) ULUSLARARASI vb.) SERAMİK KONGRESİ BİLDİRİLER KİTABI, TÜRK SERAMİK DERNEĞİ YAYINLARI NO : 5, 672 SAYFA, İSTANBUL, 1992, EDİTÖR : ÖVEÇOĞLU M. L.. 2) II. ULUSLARARASI SERAMİK KONGRESİ BİLDİRİLER KİTABI CİLT I, CİLT II, TÜRK SERAMİK DERNEĞİ YAYINLARI NO : 11, 1048 SAYFA, İSTANBUL, 1994, EDİTÖRLER : ÖVEÇOĞLU M. L., YAPARLAR H. 3) 8. ULUSLARARASI METALURJİ VE MALZENE KONGRESİ BİLDİRİLER KİTABI - CİLT I, CİLT II, TMMOB METALURJİ MÜHENDİSLERİ ODASI YAYINI, NO : 32, 1446 SAYFA, ANKARA, 1995, EDİTÖRLER : SEVİNÇ N., ÖZTÜRK T., ÖVEÇOĞLU M. L., GÜRESİN N., KİPER M., SÜZEN F.. 4) 9. ULUSLARARASI METALURJİ VE MALZENE KONGRESİ BİLDİRİLER KİTABI - CİLT I, CİLT II,, TMMOB METALURJİ MÜHENDİSLERİ ODASI YAYINI, NO : 33, 1660 SAYFA, ANKARA, 1997, EDİTÖRLER : KAYALI E. S., ÜRGEN M., ŞEŞEN K., GÜR C. H., ÖVEÇOĞLU M. L.. 5) 11. ULUSLARARASI METALURJİ VE MALZENE KONGRESİ BİLDİRİLER KİTABI ve CD KİTABI, TMMOB METALURJİ MÜHENDİSLERİ ODASI YAYINI, NO : 46, 2134 SAYFA, ANKARA, 2002, EDİTÖRLER : GÜR C. H., KAPTI İ., ÖVEÇOĞLU M. L., ÖZKAL B., ÜRGEN M., SAVAŞ H. 6) 8TH EUROPEAN CERAMIC CONGRESS AND EXHIBITION, VOLUME I, VOLUME II, VOLUME III, TRANSTECH PUBLICATION 2134 SAYFA, ANKARA, 2002, EDİTÖRLER : MANDAL H., ÖVEÇOĞLU M. L. DÜZENLEDİĞİM ULUSLARARASI BİLİMSEL KONGRELER : 1) INTERNATIONAL CERAMIC CONGRESS, KONGRE YÖNETMENİ, TÜRK SERAMİK DERNEĞİ, 1923 EKİM 1992, İ.T.Ü. MAÇKA SOSYAL TESİSLERİ-İSTANBUL. 2) 7TH INTERNATIONAL METALLURGY & MATERIALS CONGRESS, KONGRE YÖN. YARD, TMMOB METALURJİ MÜHENDİSLERİ ODASI, 4-8 MAYIS 1993, ALTINPARK EXPOCENTER - ANKARA. 3) 2ND INTERNATIONAL CERAMICS CONGRESS, KONGRE YÖNETMENİ, TÜRK SERAMİK DERNEĞİ, 24-28 EKİM 1994, İ.T.Ü. MAÇKA SOSYAL TESİSLERİ-İSTANBUL. 4) 8TH INTERNATIONAL METALLURGY & MATERIALS CONGRESS, KONGRE YÖN. YARD, TMMOB METALURJİ MÜHENDİSLERİ ODASI, 6-9 HAZİRAN 1995, İSTANBUL SERGİ SARAYI -İSTANBUL. 5) 11TH INTERNATIONAL METALLURGY & MATERIALS CONGRESS, KONGRE BAŞKANI, TMMOB METALURJİ MÜHENDİSLERİ ODASI, 5-8 HAZİRAN 2002, CNR- İSTANBUL. 6) 8TH ECERS CONFERENCE & EXHIBITION, BİLİM KOMİTESİ BAŞKANI, TÜRK SERAMİK DERNEĞİ, 29 HAZİRAN - 3 TEMMUZ 2003, LÜTFİ KIRDAR KONGRE VE SERGİ MERKEZİ, İSTANBUL. MESLEK KURULUŞLARINA ÜYELİKLER : 1) TMMOB METALURJİ MÜHENDİSLERİ ODASI, 1979 HALEN 2) TÜRK SERAMİK DERNEĞİ, 1991 HALEN 3) AMERICAN SOCIETY FOR METALS (ASM), 1984 - HALEN DANIŞMANLIKLAR : 1) TÜBİTAK-MAM GEBZE, YARI-ZAMANLI ARAŞTIRMACI, 1991- 1992 2) SÖĞÜT SERAMİK A. Ş., TEKNİK DANIŞMAN, 1994 ÖDÜLLER Ödülün Adı Alındığı Kuruluş Yılı Seramik Onur Ödülü Türkiye Seramik Federasyonu 2010 Teşvik Ödülü TÜBİTAK Başkanlık 1997 YAYINLARI SCI, SSCI, AHCI indekslerine giren dergilerde yayınlanan makaleler 1. Öveçoğlu M. L. and Nix W. D., "Characterization of Rapidly Solidified and Mechanically Alloyed Al-Fe-Ce Powders", International Journal of Powder Metallurgy, 22, (1986), 17 - 30 2. Öveçoğlu M. L., Barnett D.M. and Nix W. D., "Analysis of the Interfacial Stresses Produced by a Pile-up of Discrete Edge Dislocations in Two Phase Materials", Acta Metallurgica, 35(7) (1987), 1779 - 1789. 3. Öveçoğlu M. L., Doerner M.F. and Nix W. D, "Elastic Interactions of Screw Dislocations in Thin Films on Substrates", Acta Metallurgica, 35(12), (1987), 2947. 4. Wu I.-W., Chiang A., Fuse M., Öveçoğlu M. L. and Huang T. Y., "Retardation of Nucleation Rate for Grain Size Enhancement by Deep Silicon Implantation of Low-Pressure Chemical Vapor Deposited Amorphous Silicon Films", Journal of Applied Physics , 65(10), (15 May 1989), 4036 4039. 5. Öveçoğlu M. L., Özkal B. and Suryanarayana C., "A Comparison of Sintering Characteristics of Ball-Milled and Attritor-Milled W-Ni-Fe Heavy Alloy", Journal of Materials Research, 11(7), (1996), 1673-1682. 6. Öveçoğlu M. L., Suryanarayana C. and Nix W. D, "Identification of Precipitate Phases in a Mechanically Alloyed Rapidly Solidified Al-Fe-Ce Alloy", Metallurgical and Materials and Transactions, 27A (4), (1996), 1033-1041 7. Osma A., E. S. Kayalı E. S. and Öveçoğlu M. L., "The Effect of Elevated Temperature and Silicon Addition on a Cobalt-Base Wear Resistant Superalloy", Journal of Materials Science, 31, (1996), 4603-4608. 8. Öveçoğlu M. L., Kuban B. and Özer H., "Characterization and Crystallization Kinetics of a Diopside-Based Glass-Ceramic Developed from Glass Industry Raw Materials", Journal of the European Ceramic Society, 17, (1997), 957-964. 9. Öveçoğlu M. L., "Microstructural Characterization and Physical Properties of a Slag-Based Glass-Ceramic Crystallized at 950 °C and 1100 °C", Journal of the European Ceramic Society, 18, (1998), 161-168. 10. Öveçoğlu M. L., Aslanoğlu Z. and Özkal B, "Microstructural Characterization of a High Carbon Fe-C Alloy during Attrition Milling and Sintering", The International Journal of Powder Metallurgy, 34(6), (1998), 47-56. 11. Senkov O. N., Srisukhumbowornchai N., M. L. Öveçoğlu and Froes F. H., "Microstructural Evolution of a Nanocrystalline Ti-47Al-3Cr Alloy on Annealing at 1200 °C", Scripta Materialia, 39(6), (1998), 691-698. 12. Senkov O. N, M. L. Öveçoğlu, Srisukhumbowornchai N., and Froes F. H., "High-Temperature Stability of a Nanocrystalline Ti-47Al-3Cr Alloy during Mechanical Alloying and Elevated Temperature Annealing", Journal of Materials Research, 13(12), (1998), 3399-3410. 13. Senkov O. N, Öveçoğlu M. L., Srisukhumbowornchai N., and Froes F. H., "Stability of a Nanocrystalline Structure in TiAl-based Alloys", Nanostructured Materials, 10(6), (1998), 935-945. 14. Öveçoğlu M. L., Senkov O. N, Srisukhumbowornchai N. and Froes F. H.,, "Microstructural Evolution of a Nanocrystalline Ti-47Al-3Cr Alloy During Annealing in the alpha2 + gamma Phase Field", Metallurgical and Materials Transactions A, 30A, (1999), 751-761. 15. Erol M., Genç A., Öveçoğlu M. L., Yücelen E., Küçükbayrak S. and Taptık Y., "Characterization of a Glass-ceramic Devitrified from Fly Ash of the Çayırhan Thermal Power Plant", Journal of the European Ceramic Society, 20, (2000), 2209-2214. 16. Aslanoğlu Z., Karakaş Y., and Öveçoğlu M. L., "Switching Performance of the W-35Ag Electrical Contacts Fabricated by Mechanical Alloying", The International Journal of Powder Metallurgy, 36(8), (2000), 35-43. 17. Çavuşoğlu M., Senkov O. N, Froes F. H., Öveçoğlu M. L., Zimmerly T., and İnal O., "Compaction of Nanocrystalline Gamma-Titanium Aluminides", Key Engineering Materials, 188, (2000), 15-26. 18. Öveçoğlu M. L., Özen G., Demirata B., and Genç A., "Microstructural Characterization and Crystallization Kinetics of (1 - x)TeO2 - xLiCl (x = 0.3 - 0.4 mol.) Glasses", Journal of the European Ceramic Society, 21, (2001), 177-183. 19. Özen G., Demirata B., Öveçoğlu M. L. and Genç A., "Thermal and Optical Properties of Tm3+ doped Tellurite Glasses", Spectrochimica Acta A : Molecular and Bimolecular Spectroscopy, 57, (2001), 273-280. 20. Aslanoğlu Z., Karakaş Y., Öveçoğlu M. L. and Özkal B., "Effects of Nickel Addition on the Properties of Ag-W Electrical Contact Materials", Powder Metallurgy, 44(1), (2001), 77- 81. 21. Özen G., Demirata B., Öveçoğlu M. L., "Effect of Composition on the Thermal Properties and Spontaneous Emission Probabilities of Tm3+ in LiCl-TeO2 Glass", Journal of Materials Research, 16(5), (2001), 1381-1388. 22. Erol M., Küçükbayrak S., Ersoy-Meriçboyu A., Öveçoğlu M. L., "Crystallization Behaviour of Glasses Produced from Flyash", Journal of the European Ceramic Society, 21(16), (2001), 28352841. 23. Cenk S., Demirata B., Öveçoğlu M. L., Özen G., "Thermal Properties and Optical Transition Probabilities of Tm3+ doped TeO2-WO3 glass", Spectrochimica Acta A : Molecular and Biomolecular Spectroscopy, 57/12), (2001), 2367-2372. 24. Ünlü N., Genç A., Öveçoğlu M. L., Eruslu N., Froes F. H.,, "Characterization Investigations of Melt-spun Ternary Al-xSi-3.3Fe (x = 10, 20 wt%) Alloys", Journal of Alloys and Compounds, 322, (2001), 249-256. 25. Öveçoğlu M. L., Çataklı E., Erkmen Z. E. , Özkal B., "Microstructural Morphologies of Slag based Glass-Ceramics Nucleated with 5 wt% Cr2O3 and 5 wt% Cr2O3 + 5 wt% TiO2", Key Engineering Materials, 206-213, (2002), 863-866. 26. Özen G., Demirata B., Öveçoğlu M. L., Genç A., "Effect of Modifier Content on the Crystallization and the Optical Gaps of TeO2-LiCl Glass", Key Engineering Materials, 206-213, (2002), 2073-2076. 27. Öveçoğlu M. L., Özen G., Demirata B., Genç A., "Crystallization Behaviour of xTeO2 - (1x)LiCl (x = 0.5 and 0.7 mol.) Glasses", Key Engineering Materials, 206-213, (2002), 2089-2092 (2002). 28. Ünlü N., Genç A., Öveçoğlu M. L., Lavernia E. J., Froes F. H., "Microstructural Evolution of the Melt-spun Ternary Hypoeutectic Al-7.6Si-3.3Fe (in wt%) Alloy", Journal of Alloys and Compounds, 343, (2002), 223-233. 29. Triverdi P. B., Baburaj E. G., Genç A., Öveçoğlu M. L., Patankar S., Froes F. H., "Grain-size Control in Ti-48Al-2Cr-2Nb with Yttrium Additions", Metallurgical and Materials Transactions A, 33A, (2002), 2729-2736. 30. Erol M., Demirler U., Küçükbayrak S., Meriçboyu A., Öveçoğlu M. L., "Characterization of Glass-ceramics developed from Seyitömer Thermal Power Plant Fly Ash", Journal of the European Ceramic Society, 23, (2003), 757-763. 31. Öveçoğlu M. L., Ünlü N., Eruslu N., Genç A., "Characterization Investigations of a Melt-spun Ternary Al-8Si-5.1Cu (in wt%) Alloy", Materials Letters, 57, (2003), 3296-3301. 32. Öveçoğlu M. L., Özkal B., "Mechanochemical Synthesis of WC Powders by Mechanical Alloying", Key Engineering Materials, 264-268, (2004), 89-92. 33. Özkal B., Öveçoğlu M. L., "Slip Casting of Co-Milled Al2O3 - SiC Powder Mixtures and Their Characterization before and after Sintering against Slip Thickness", Key Engineering Materials, 264-268, (2004), 201-204. 34. Gökçe H., Öveçoğlu M. L., Özkal B., "Comparison of Physical and Mechanical Properties of Cordierite based Ceramics Produced from Natural Raw Materials and Synthetic Powders", Key Engineering Materials, 264-268, (2004), 929-932. 35. Akkaş H. D., Öveçoğlu M. L., Tanoğlu M., "Development of Si-O-C Based Ceramic Matrix Composites Produced via Pyrolysis of a Polysiloxane", Key Engineering Materials, 264-268, (2004), 961-964. 36. Gökçe H., Öveçoğlu M. L., Aslanoğlu Z., Özkal B., "Microstructural Characterization of Cordeirite Ceramics from Natural Raw Materials and Synthetic Powders", Key Engineering Materials, 264-268, (2004), 1035-1039. 37. Erol M., Küçükbayrak S., Ersoy-Meriçboyu A., Öveçoğlu M. L.,, "Production of Fly AshBased Glass-ceramics by Sintering", Key Engineering Materials, 264-268, (2004), 1839-1842. 38. Altın F., Kalem V., Özen G., Öveçoğlu M. L., Özalp M. R., "Optical Properties and Crystallization Kinetics of TeO2-GeO2-ZnO Glasses", Key Engineering Materials, 264-268, (2004), 1875-1879. 39. Öveçoğlu M. L., Özalp R., Özen G., "Crystallization Behaviour of Some TeO2-ZnO Glasses", Key Engineering Materials, 264-268, (2004), 1891-1894. 40. Erol M., Küçükbayrak S., Ersoy-Meriçboyu A., Öveçoğlu M. L., "Crystallization Kinetics of Fly Ash-Based Glasses", Key Engineering Materials, 264-268, (2004), 1895-1899. 41. Altın F., Öveçoğlu M. L.,Kalem V., Özkal B., Özen G., "Crystallization Behaviour of some TeO2-GeO2-ZnO Glasses", Key Engineering Materials, 264-268, (2004), 1903-1906. 42. Özalp R. , Özen G., Öveçoğlu M. L., Kalem V., Altın F., "Effect of Modifier Content on the Crystallization and the Optical Gaps of a TeO2-ZnO Glass", Key Engineering Materials, 264-268, (2004), 1907-1910. 43. Kalem V., Altın F., Öveçoğlu M. L., Özen G., Özkal B., "Crystallization Behaviour of (1-x) TeO2-xGeO2 (x = 0.1 and 0.3 mol.) Glasses", Key Engineering Materials, 264-268, (2004), 19151918. 44. Kalem V., Özen G., Altın F., Öveçoğlu M. L., Özalp R., "Kinetic Study and Optical Investigations of some TeO2-GeO2 Glasses", Key Engineering Materials, 264-268, (2004), 1919- 1922. 45. Erol M., Küçükbayrak S., Ersoy-Meriçboyu A., Öveçoğlu M. L.,, "Characterization of Fly AshBased Glass-Ceramic Samples Quenched in Air Followed by Crystallization Stage", Key Engineering Materials, 264-268, (2004), 1931-1934. 46. Sınmazışık G., Şen D., Tunçelli B., Poyrazoğlu E., Özkal B., Öveçoğlu M. L., "A Comparative Study of the Effect of Different Polishing Systems on Ceramic Dental Surfaces", Key Engineering Materials, 264-268, (2004), 1997-2000. 47. Sazak-Öveçoğlu H., M. Günday M., M. L. Öveçoğlu M. L., F. Özer F., B. Tarçın B., "Chemical Degradation of Restorative Materials", Key Engineering Materials, 264-268, (2004), 2009-2012. 48. Sazak-Öveçoğlu H., Öveçoğlu M. L., Günday M., Tarçın B., Eti E., "Effect of Photopolymerization Variables on Composite Hardness", Key Engineering Materials, 264-268, (2004), 2027-2030. 49. Şen D., Sınmazışık G., Poyrazoğlu E., Tunçelli B., Özkal B., Öveçoğlu M. L., Gülmez T., "Effects of Different Acid Treatments on Dental Ceramic Surfaces", Key Engineering Materials, 264-268, (2004), 2035-2038. 50. Sazak-Öveçoğlu H., Sınmazışık G., Garip Y., Günday M., Eti E., Gülmez T., Öveçoğlu M. L., "Evaluation of Porcelain Surface Treatments and Agents for Composite to Porcelain Repair", Key Engineering Materials, 264-268, (2004), 2039-2042. 51. Sazak-Öveçoğlu H., Tarçın B., Özer F., Günday M., Öveçoğlu M. L., Gülmez T., "Mechanical Properties of Ceramics and Composite Resins", Key Engineering Materials, 264-268, (2004), 20552058. 52. Öveçoğlu M. L., Özen G., Cenk S.,"Microstructural Characterization and Crystallization Behaviour of (1-x)TeO2 - xWO3 (x = 0.15, 0.25, 0.3 mol.) Glasses, Journal of European Ceramic Society, 26, (2006), 1149-1158. 53. Kabalcı, İ., Özen, G., Öveçoğlu, M. L., Sennaroğlu, A., "Thermal study and linear optical properties of (1-x)TeO2-(x)PbF2 (x=0.10, 0.15, 0.25 mol.) Glasses", Journal of Alloys and Compounds, 419, (2006), 294-298. 54. Sınmazışık, G., Öveçoğlu, M. L., "Physical properties and microstructural characterization of dental porcelains mixed with distilled water and modeling liquid", Dental Materials, 22, (2006), 735-745. 55. Akkaş, H. D., Öveçoğlu, M. L., Tanoğlu, M., "Silicon oxycarbide-based composites produced from pyrolysis of polysiloxenes with active Ti filler", Journal of the European Ceramic Society, 26, (2006), 3441-3449. 56. Eşin, C., Kabalcı, İ., Öveçoğlu, M. L., Özen, G., "Crystallization Behaviour of (1-x)TeO2(x)BaO (x=0.10, 0.15 and 0.25 in molar ratio) Glasses", Journal of the European Ceramic Society, 27, (2007), 1797-1800. 57. Öveçoğlu, M. L., Kabalcı, İ., Öz, B., Özen, G., "Microstructural Characterization of (1-x)TeO2(x)PbF2 (x=0.10, and 0.25 mol) glasses", Journal of the European Ceramic Society, 27, (2007), 1801-1804. 58. Öz, B., Kabalcı, İ., Öveçoğlu, M. L., Özen, G., "Thermal Properties and Crystallization Behavior of Some TeO2- K2O Glasses", Journal of the European Ceramic Society, 27, (2007), 1823-1827. 59. Öz, B., Öveçoğlu, M. L., Kabalcı, İ., Özen, G., "Microstructural Characterization and Crystallization Kinetics of (1-x)TeO2-xK2O (x = 0.05, 0.10, 0.15, 0..20 mol) Glasses", Journal of the European Ceramic Society, 27, (2007), 3239-3251. 60. Stanciu S., Bujoreanu L.-G., Özkal B., Öveçoğlu M. L., Sandu A. V., "Study of Precipitate Formation in Cu-Al-Ni-Mn-Fe Shape Memory Alloys", Journal of Optoelectronics and Advenced Materials, 10(6), (2008), 1365 - 1369. 61. Tatar D., Öveçoğlu M.L., Özen G., "Microstructural Characterization and Crystallization of (1x)TeO2-xCdF2 (x= 0.10, 0.15, 0.25 mol) Glasses", Journal of the European Ceramic Society, 28, (2008), 3097- 3106. 62. Kalaycıoğlu H., Çankaya H., Özen G., Öveçoğlu M. L., Sennaroğlu A., "Lasing at 1065 nm in Bulk Nd3+ -doped Telluride - Tungstate Glass", Optics Communications, 281, (2008), 6056 6060. 63. Tatar D., Öveçoğlu M.L., Özen G., Erim-Berker B., "Glass Transition and Cystallization of 0.8TeO2 + 0.2CdF2 Glass", Journal of the European Ceramic Society, 29, (2009), 329 - 335 . 64. Erkmen Z. E., Çataklı E., Öveçoğlu M. L. "Characterization and Crystallization Kinetics of Glass Ceramics Developed from Erdemir Blast Furnace Slags containing Cr2O3 and TiO2 Nucleants", Advances in Applied Ceramics, 108(1), (2009), 57 - 66. 65. Kabalcı İ., Özen G., Öveçoğlu M. L., "Microstructure and Crystallization Properties of TeO2 PbF2 Glasses" , Journal of Raman Spectroscopy, 40, (2009), 272-276. 66. Salman S., Gündüz O., Yılmaz S., Öveçoğlu M. L., Snyder R. L., Agathopoulos S., Oktar F. N., "Sintering Effect on Mechanical Properties of Composites of natural Hydroxyapatites and Titanium", Ceramics International, 35, (2009), 2965-2971. 67. Tatar D., Öveçoğlu M. L., Özen G., Speakman S., "Microstructural Characterization and Crystallization Kinetics of (1-x)TeO2 - 0.10CdF2-xPbF2 (x = 0.05, 0.10 and 0.15 mol) Glasses", Journal of Materials Research, 2009, 24(10), (2009), 3087-3094. 68. Ünal N. and Öveçoğlu M. L., Effects of Wet and Dry Milling Conditions on the Properties of Mechanically Alloyed and Sintered W - 1 wt% C and W - 2 wt% B4C - 1 wt% C Composites, Powder Metallurgy, 52(3), (2009), 254-265. 69. Tarçın B., Günday M., Öveçoğlu H. S., Türkmen C., Öveçoğlu M. L., Öksüz M., Ay M., "Tensile Bond Strength of Dentin Adhesives on Acid-and Laser-Etched Dentin Surfaces", Quintessence International, 40(10), (2009), 865 - 874. 70. Coşkun S., Özkal B., Tanoğlu M., Öveçoğlu M. L., "Characterization Investigations during Mechanical Alloying and Sintering of W- 20 vol %SiC Composites", Journal of Alloys and Compounds, 492, (2010), 576 - 584. 71. Genç A., Coşkun S., Öveçoğlu M. L., "Decarburization of TiC in Ni Activated Sintered WxTiC (x = 0, 5, 10, 15 WT%) Composites and the Effects of Heat Treatment on the Microstructural and Physical Properties", International Journal of Refractory Metals and Hard Materials, 28, (2010), 451-458. 72. Genç A., Coşkun S., Öveçoğlu M. L., "Microstructural Characterizations of Ni Activated Sintered W-2wt% TiC Composites Produced via Mechanical Alloying", Journal of Alloys and Compounds, 497, (2010), 80 - 89. 73. Evirgen A., Öveçoğlu M. L., "Characterization Investigations of a Mechanically Alloyed and Sintered Al-2wt%Cu Alloy Reinforced with WC Particles", Journal of Alloys and Compounds, 496, (2010), 212-217. 74. Genç A., Coşkun S., Öveçoğlu M. L.,''Fabrication and Properties of Mechanically Alloyed and Ni Activated Sintered W Matrix Composites Reinforced with Y2O3 and TiB2 Particles'', Materials Characterization, 61, (2010), 740 - 748. 75. Özkal B., Upadhyaya A., Öveçoğlu M. L., German R. M., "Comparative properties of 85W 15Cu Powders Prepared Using Milling and Coating Techniques", Powder Metallurgy, 53(3), 2010, 236 - 243. 76. Tatar, D. Özen, G. , Erim B. , Öveçoğlu, M. L., Raman Characterizations and Structural Properties of the Binary TeO2-WO3, TeO2-CdF2 and Ternary TeO2-CdF2-WO3 Glasses, Journal of Raman Spectroscopy, 49, (2010), 797 - 807. 77. Kaftelen H., Öveçoğlu M. L., Henein H., Çimenoğlu H., "ZrC Particle reinforced Al - 4 wt% Cu Alloy Composites fabricated by Mechanical Alloying and Vacuum Hot Pressing : Microstructural Evaluation and Mechanical Properties", Materials Science and Engineering A, 527, (2010), 5930 - 5938. 78. Genç A., Öveçoğlu M. L., "Characterization Investigations during Mechanical Alloying and Sintering of Ni-W Solid Solution Alloys dispersed with WC and Y2O3 Particles", Journal of Alloys and Compounds, 508, (2010), 162 - 171. 79. Bilir, G., Özen, G., Tatar, D., Öveçoğlu, M. L.,"Judd-Ofelt Analysis and Near Infrared Emission Proprties of the Er3+ Ions in Tellurite Glasses containing WO3 and CdO", Optics Communications, 284, (2011), 863 - 868. 80. Kayacı K., Öveçoğlu M. L., Genç C., Erdoğan M., "Investigation on Usage of the Karaköy Granites (Bilecik, NW Turkey) in Porcelain Tile Production", Industrial Ceramics, 31(1), (2011), 1 - 10.. 81. Ünal, N., Kern, F., Öveçoğlu, M. L., Gadow, R. "Optimization of Processing Conditions and Characterization Investigations of Ceramic Injection Molded and Sintered ZrO2/WC Composites", Journal of Alloys and Compounds, 509(14),(2011), 4797-4804. 82. Kaftelen H., Ünlü N., Göller G., Öveçoğlu M. L., Henein H., "Comparative ProcessingStructure-Property Studies of Al-Cu Matrix Composites Reinforced with TiC Particulates", Composites : Part A, 42(7), (2011), 812 - 824. 83. Coşkun S., Öveçoğlu M. L., "Effects of Y2O3 Additions on Mechanically Alloyed and Sintered W - 4 wt.% SiC Composites ", International Journal of Refractory Metals and Hard Metals, 29(6), (2011), 651-655. 84. Ağaoğulları D., Balcı Ö., Duman İ., Öveçoğlu M. L., "Synthesis of alpha- and betaRhombohedral Boron Powders via Gas Phase Thermal Dissociation of Boron Trichloride by Hydrogen", Metallurgical and Materials Transactions B, 42(3) (2011), 568 - 574. 85. Ünal N., Kern F., Öveçoğlu M. L., Gadow R., "Influence of WC particles on the Microstructural and Mechanical Properties of 3 mol% Y2O3 Stabilized ZrO2 Matrix Composites Produced by Hot Pressing", Journal of the European Ceramic Society, 31(13), (2011), 2267-2275. 86. Gökçe, H., Ağaoğulları, D., Öveçoğlu, M. L., Duman, I., Boyraz, T., "Characterization of Microstructural and Thermal Properties of Steatite/Cordierite Ceramics prepared by using natural Raw Materials", Journal of the European Ceramic Society, 31(14), (2011), 2741 - 2747. 87. Tatar D., Öveçoğlu M. L. and Özen G., "Effects of CdF2 and WO3 Additions on the Microstructural Thermal Properties of TeO2 - CdF2 - WO3 Glass System", Ceramics International, 38, (2012), 1927 - 1935. 88. Balcı Ö., Ağaoğulları D., Duman İ. and Öveçoğlu M. L., "Carbothermal Production of ZrB2 ZrO2 Ceramic Powders from ZrO2 - B2O3/B System by High-energy Ball Milling and Annealing assisted Process", Ceramics International, 38, (2012), 2201 - 2207. 89. Ağaoğulları D., Kel D., Gökçe H., Duman İ., Öveçoğlu M. L., Akarsubaşı A. T., , Bilgiç D. and Oktar F. N.,"Bioceramic Production from Sea Urchins", Acta Physica Polonica A, 121 (2012), 23 26. 90. Ağaoğulları D., Gökçe H., Duman İ., Öveçoğlu M. L., "Aluminum Diboride Synthesis from Elemental Powders by Mechanical Alloying and Annealing", Journal of the European Ceramic Society, 32(7), (2012), 1457 -1462. 91. Ağaoğulları D., Gökçe H., Duman İ., Öveçoğlu M. L., "Characterization Investigations of ZrB2/ZrC Ceramic Powders Synthesized by Mechanical Alloying of Elemental Zr, B and C Blends", Journal of the European Ceramic Society, 32(7),(2012),1447 - 1455. 92. Demirkan Ö. U., Genç A., Öveçoğlu M. L., "Effects of Al2O3 Addition on the Microstructure and Properties of Ni Activated Sintered W Matrix Composites", International Journal of Refractory Metals and Hard Materials, 32, (2012), 33 - 38. 93. Ağaoğulları D., Gökçe H., Duman İ., Öveçoğlu M. L., "Influences of Metallic Co and Mechanical Alloying on the Microstructural and Mechanical Properties of TiB2 Ceramics prepared via Pressureless Sintering", Journal of the European Ceramic Society, 32(9), (2012), 1949 - 1956. 94. Kaftelen H. and Öveçoğlu M. L., "Microstructural Characterization and Wear Properties of Ultra dispersed Nano-diamond (UDD) reinforced Al Matrix Composites fabricated by Ball-milling and Sintering", Journal of Composite Materials,46(13),(2012), 1521 - 1534. 95. Ağaoğulları D., Balcı Ö., Gökçe H., Duman İ., and Öveçoğlu M. L., "Synthesis of Magnesium Borates by Mechanically Activated Annealing", Metallurgical and Materials Transactions A, 32, (2012), 1949 - 1956. 96. Balcı Ö., Ağaoğulları D., Duman İ., Öveçoğlu M. L., "Synthesis of CaB6 Powders via Mechanochemical Reaction of Ca/B2O3 Blends" Powder Technology. 225, 2012, 136 - 142. 97. Genç A., Öveçoğlu M.L., Baydoğan M., Turan S., "Fabrication and Characterization of Ni-W Solid Solution Alloys via Mechanical Alloying and Pressureless Sintering", Materials & Design, 42, (2012), 495 - 504. 98. Genç A,. Ayas E., Öveçoğlu M. L., Turan S., "Fabrication of in situ Ni(W) - WC Nano Composites via Mechanical Alloying and Sintering", Journal of Alloys and Compounds, 542 (2102), 97 - 104. 99. Ağaoğulları D., Duman İ., Öveçoğlu M. L., "Synthesis of LaB6 Powders from La2O3, B2O3 and Mg Blends via a Mechanochemical Route", Ceramics International, 38 (2012), 6203 - 6214. 100. Akarsu A. C., Gökçe H., Ertuğ B., Addemir A. O., Öveçoğlu M. L., Boyraz T., "Microstructural and Mechanical Properties of Hot-pressed (B4C, SiC)/TiB2 Composites", Ceramics Forum International, 89(11-12), (2012), E1 - E5. 101. Coşkun S., Öveçoğlu M.L., "Room-Temperature Mechanochemical Synthesis of W2B5 Powders", Metallurgical and Materials Transactions A, 44A, 4, (2013), 1805 - 1813. 102. Kaftelen H., Henein H., Öveçoğlu M. L., "Fabrication of TiC and ZrC reinforced Al-4wt.%Cu Composite Droplets using Impulse Atomization, Journal of Composite Materials, 47(5), (March 2013), (2013), 587 - 601. 103. Ertuğ B., Çetiner B. N., Sadullahoğlu G., Gökçe H., Erkmen Z. E. and Öveçoğlu M. L. "The Effect of Mechanical Alloying on the Microhardness and Fracture Toughness of BaTiO3", Acta Physica Polonica A, 123(2), (2013), 188 - 190. 104. Gökçe H., Balcı Ö., Ağaoğulları D., Demirkan O. U., Genç A., Öveçoğlu M. L., Duman İ., "Characterization Investigations of W-Ni Matrix Composites Reinforced with TiB2 and La2O3", Acta Physica Polonica A, 123(2), (2013), 309-311. 105. Genç A., Kaya P., Ayas E., Öveçoğlu M. L., Turan S., "Microstructural Evolution of Mechanically Alloyed and Spark Plasma sintered Ni-W Alloy Matrix Composites", Journal of Alloys and Compounds, 571(15 September 2013), (2013), 159 - 167. 106. Coşkun S., Genç A., Öveçoğlu M. L., "Synthesis of W - 3 wt% Mn - 2 wt% VC Composites by High Energy Milling and Sintering", Metals and Materials International, 19(3), May 2013, (2013), 533 - 541. 107. Genç A., Öveçoğlu M. L., Turan S., "Characterization of Ni-W Solid Solution Alloy Powders and Sintered Compacts Synthesized via Mechanically Activated Hydrogen Reduction of the NiOWO3 Mixtures", Metals and Materials International, 19(4), July 2013, (2013), 813-819. 108. Balcı Ö., Ağaoğulları D., Gökçe H., Duman İ., Öveçoğlu M. L.,"Influence of TiB2 Particle Size on the Microstructure and Properties of Al Matrix Composites prepared via Mechanical Alloying and Pressureless Sintering", Journal of Alloys and Compounds, (2013), http://dx.doi.org/10.1016/j.jallcom.2013.03.007, baskıda. 109. Ağaoğulları D., Balcı Ö., Gökçe H., Öveçoğlu M. L. , Duman İ., "Comparative Investigations of the Activated Sintered W–1 wt.% Ni Composites Reinforced with Various Oxide and Boride Particles", International Journal of Hard Metals and Refractory Materials, (2013), http://dx.doi.org/10.1016/j.ijrmhm.2013.07.010, baskıda. Diğer dergilerde yayınlanan makaleler 1. Hampel H., Öveçoğlu M. L., Akmandor İ. S., "Patlama Sonrası Yayılan Şok Dalgalarının Teknolojik Amaçlarda Kullanılması", Metal-Makina, 2(13), (1990), 23 - 28. 2. Öveçoğlu M. L., "Kompozit Malzemelerde Kenar ve Vida Dislokasyonlarının Katman Arayüzeylerinde Yarattığı Elastik Gerilmeler", Metalurji Dergisi, 72/73, 1991, 60 - 70. 3. Öveçoğlu M. L., "Endüstriyel Atıkların Yapı Malzemeleri Olarak Değerlendirilmesi : CamCeramikler", ŞişeCam Teknik Bülteni, 22(1), (1993), 22-23. 4. Şen U., Öveçoğlu M. L., "Yüksek Sıcaklık Süreçleri ile İleri Ceramics Malzemelerin Üretilmesi", Seramik Dünyası, 1(4), 1993, 23 - 26. 5. Ünlü N., Öveçoğlu M. L., "Toz Metalurjisinin Yaygın Kullanım Alanları", Metal Dünyası, 1(8), (1993), 12 - 19. 6. Okumuş S. C., Öveçoğlu M. L., "Toz Metalurjisinde Atomizasyon Yöntemi ve Bu Yöntemle Üretilen Fe Esaslı Malzemeler", Metal Dünyası, 1(8), (1993), 26 - 39. 7. Gürmen S., Öveçoğlu M. L., "Sementit Karbür Esaslı Malzemelerin Toz Metalurjisi İle Üretimi", Metal Dünyası, 1(8), (1993), 64 - 71. 8. C. Kurnaz C., Öveçoğlu M. L., "Toz Metalurjisi Yöntemleri İle Elektrik Kontaktör Malzemelerinin Üretimi Ve Özelliklerinin Belirlenmesi", Metal Dünyası, 1(8), (1993), 72 - 86. 9. Tanrıöver K., Öveçoğlu M. L., "Titanyum - Üretim Süreçleri ve Kullanım Alanları", Metal Dünyası, 2(19), (1994), 69 - 75. 10. Öveçoğlu M. L., "Elasticity Solutions of Multiple Matrix Phase Edge Dislocations Interacting with Second Phases in Multiphase Materials", Bulletin of the Technical University of Istanbul, 48, (1995), 3-4, 669. 11. Mihok L., Fedicova D., Weagova Z., Potocky L., Öveçoğlu M. L., "Influence of Gangue Content on Properties of Blast Furnace Pellets", Acta Metallurgica Slovaca, 5, (1997), 280 - 287. 12. Özyeğin, L. S., Gündüz, O., O., Oktar, F. N., Öz, B., Agathopoulos, S., Salman, S., Öveçoğlu M. L., "Sintering Effect on Mechanical Properties of Composites of Bovine Derived Hydroxyapatite (EPA) with Titaniıum, Key Engineering Materials, 309-311, (2006), 359-362. 13. Gündüz, O., Oktar, F. N., Öz, B., Altundal, H., Agathopoulos, S., Salman, S., Öveçoğlu M. L., "Sintering Effect on Mechanical Properties of Composites of Enamel Derived Hydroxyapatite (EPA) and Titaniıum, Key Engineering Materials, 309-311, (2006), 1137-1140. 14. Kayacı K., Öveçoğlu M. L., Erdoğan M., Genç Ş. C., Ateş O., "Evaluation of attrition milled microgranite for possible use as a fluxing agent in porcelain tile bodies, Interceram International Ceramic Review, 57 (6), (2008), 423-429. 15. Keçeli Z., Öğünç H., Boyraz T., Gökçe H., Addemir O., ÖveçoğluM. L., "Effects of B4C Addition on the Microstructural and Thermal Properties of Hot Pressed Ceramic Matrix Composites", Achives of Materials Science, 29(1-2), (2008), 41, 8211 49. 16. Kel D., Karaçaylı, Yetmez, M., Gökçe, H., Ağaoğulları, D., Öveçoğlu, M. L., Duman, I., Kayalı, E. S., Oktar, F. N., "Hydroxyapatite Production with various Techniques from Sea Urchin", International Journal of Artificial Organs, 34(8), SPECİAL ISSUE: SI, (2011), 700-700. 17. Yılmaz D., Tatar D., Elbizim M. C., Öveçoğlu M. L., "Thermal properties and microstructural characterization of vanadium germanate glasses", Physica Status Solidi (C), 2011, baskıda. 18. Elbizim M. C., Tatar D., Yılmaz D. and Öveçoğlu M. L., "Thermal and Microstructural Investigations of Oxyfluoride Glasses", Physica Status SolidiC, 8(11-12), (2011), 3143 -3146. 19. Akyurt N., Yetmez M., Karaçaylı U., Gündüz O., Agathopoulos S., Gökçe H., Öveçoğlu M. L. and Oktar F. N., "A New Natural Biomaterial : Sheep Derived Hydroxyapatite", Key Engineering Materials, 493 - 494, (2012), 281 - 286. 20. Kel D., Gökçe H., Bilgiç D., Ağaoğullaru D., Duman İ., Öveçoğlu M. L., Kayalı E. S., Kıyıcı I. A., Agathopoulos S. and Oktar F. N., "Production of NAtural Bioceramic from Land Snails", Key Engineering, 493 - 494, (2012), 287 - 292. 21. Kavrar D., Öveçoğlu M. L., Türkmen H. S., "Production of a Helicopter Tail Boom and Associated Mechanical Tests", Advanced Materials Research, 445, (2012), 566 - 570. 22. Ağaoğulları D., Balcı Ö., Demirkan Ö.U., Gökçe H., Genç A., Öveçoğlu M.L., Duman I., “Development of Mechanically Alloyed and Sintered W-1 wt.% Ni Matrix Composites Reinforced with TiB2”, Solid State Phenomena, 194, (2013), 194-198. 23. Balcı Ö., Demirkan Ö.U., Ağaoğulları D., Gökçe H., Genç A., Öveçoğlu M.L., Duman I., “Effects of La2O3 Addition on the Microstructure and Properties of Activated Sintered W-Ni Compacts”, Solid State Phenomena, 194, (2013), 217-221. 24. Sadullahoğlu G., Ertuğ B., Gökçe H., "La katkısının BaFe12O19 kalıcı mıknatısların manyetik özellikleri üzerine olan etkisinin incelenmesi", Metalurji, 164, Aralık 2012, 61 - 64. Hakemli konferans/sempozyumların bildiri kitaplarında yer alan yayınlar 1. Öveçoğlu M. L and Nix W. D., "Characterization Studies of Mechanical Alloying of Rapidly Solidified Al-8.4%Fe-3.4%Ce Powders", High Strength Powder Metallurgy Alloys II, Editörler : G. J. Hildeman, M.J. Koczak, Proceedings of a TMS -AIME Symposium on Aluminum Powder Metallurgy held at the TMS AIME Fall Meetings, Toronto, KANADA, 13-17 Ekim 1985, 225 241. 2. Yaney D. L., Öveçoğlu M. L and W. D. Nix, "The Effect of Mechanical Alloying on the Deformation Behaviour of a Rapidly Solidified Al-Fe-Ce Alloy", Dispersion Strengthened Aluminum Alloys, Mayıs 1988, Editörler : Y. W. Kim and W. M. Griffith, AIME Proceedings of Annual Meeting, The Minerals, Metals & Materials Society, Phoenix, Arizon, A. B. D., 25-29 Ocak 1988, 619 - 630. 3. Öveçoğlu M. L., Nix W, D., "Elevated Temperature Deformation Behaviour of Mechanically Alloyed Rapidly Solidified Al-8.4%Fe-3.5%Ce Alloy", New Materials by Mechanical Alloying Techniques, Editörler : E. Arzt and L. Schultz, Proceedings of DGM Congress, Deutsche Gesellschaft für Metallkunde e.V., 3 - 5 Ekim 1988, 287- 295. 4. Öveçoğlu M. L., Nix W. D., "Hızlı Katılaştırılmış ve Mekanik Alaşımlanmış Al8Fe4Ce Alaşımının Mikroyapısal Karakterizasyonu ve Sürünme Özellikleri", 6th Metallurgy Congress & Exhibition Proceedings Book, Volume 1, Ankara, 31 Ekim - 4 Kasım 1990, 212-224. 5. Öveçoğlu M. L., P. Thijssen P., "Atık Yüksek Fırın Külleri ve Curufundan Geliştirilen CamCeramics Malzemelerin Özellikleri", Proceedings of 4. International Ceramics Congress and Exhibition, Editörler : N. İşler, İstanbul, 10 - 14 Aralık 1990, 124-130. 6. Öveçoğlu M. L., "Atık Demir-Çelik Curufundan Geliştirilen Yapısal Kullanıma Yönelik CamCeramics Malzemeler", VII. National Mechanics Congress Proceedings Book, Volume II, Teorik ve Uygulamalı Mekanik Türk Milli Komitesi, Antalya, 2 - 6 Eylül 1991, 440-447. 7. Öveçoğlu M. L., Kınıkoğlu S., Taşar M. S., "Development and Characterization Investigations of Titania Nucleated Slag Based Glass-ceramics", International Ceramic Congress-Proceedings Book, Editörler : M. L. Öveçoğlu, Turkish Ceramic Society Publication No : 5, Istanbul, 19 - 23 Ekim 1992, 108-118. 8. M. Tanoğlu M., H. Kara H. Öveçoğlu M. L., "Çeşitli Hammadde Katkılı Atık Demir-Çelik Curuflarından Geliştirilen Cam-Ceramikler I : Doğal Kromit Katkılı Curuf Bazlı CamCeramicslerin Karakterizasyonu", International Ceramic Congress-Proceedings Book, Editörler : M. L. Öveçoğlu, Turkish Ceramic Society Publication No : 5, Istanbul, 19 - 23 Ekim 1992, 127137. 9. Kara H., Tanoğlu M., Öveçoğlu M. L., "Çeşitli hammadde katkılı atık demir-çelik curuflarından Geliştirilen Cam-seramikler II : %7 ve %15 Kemik Külü Katkılı Curuf bazlı Cam-seramiklerin Mikroyapısal ve Fiziksel Özellikleri", International Ceramic Congress-Proceedings Book, Editörler : M. L. Öveçoğlu, Turkish Ceramic Society Publication No : 5, Istanbul, 19 - 23 Ekim 1992, 138 148. 10. Öveçoğlu M. L., Kınıkoğlu S., Ayar S., "Surface Wear and Tribological Investigations of Silica Doped Alumina Ceramics", International Ceramic Congress-Proceedings Book, Editörler : M. L. Öveçoğlu, Turkish Ceramic Society Publication No : 5, Istanbul, 19 - 23 Ekim 1992, 569-579. 11. Şulan T., Ernas G., Özkal B., Öveçoğlu M. L., "Toz Metalurjisi Yöntemleriyle Geliştirilen 90W7Ni3Fe Ağır Alaşımlarının Sıvı Faz Sinterleme Süreçleri ve Karakterizasyonu", 7th International Metallurgy and Materials Congress Proceedings Book-Volume I, Editörler : TMMOB Turkish Chamber of Metallurgical Engineers Publication, Ankara, 4 - 8 Mayıs 1993, 739-750. 12. Öveçoğlu M. L., "Sürekli Fiberlerle Pekiştirilmiş Kompozit Malzemelerde Kenar Dislokasyon Yığılması İle Oluşan Fiber Hasarı", 7th International Metallurgy and Materials Congress Proceedings Book Volume II, TMMOB Turkish Chamber of Metallurgical Engineers Publication, Ankara, 4 - 8 Mayıs 1993, 1243 -1255. 13. Özkal B., Öveçoğlu M. L, "Effects of High Energy Ball Milling of 90W7Ni3Fe Heavy Alloy Powders on Subsequent Liquid Phase Sintering Practice", PM '94 Powder Metallurgy World Congress Proceedings Vol. III, Société Française de Métallurgie et de Matériaux- European Powder Metallurgy Association, LaDefense, Paris, FRANSA, 6 - 9 Haziran 1994, 2009 - 2012. 14. Öveçoğlu M. L., Tanoğlu M., Kınıkoğlu S., Taşar M., "Microstructural and Physical Properties of Waste Turkish Iron Slag Based Glass-Ceramics Nucleated with Titania and Natural Chromite Ore", Advances in Science and Technology : Ceramics-Charting the Future, Volume 3A, Editör : S. Vincenzini, TECHNA Srl., Faenza/ITALYA 1995; Proceedings of the 8th CIMTEC World Ceramics Congress and Forum on New Materials held in Florence, ITALYA, 29 Haziran - 4 Temmuz 1994, 221-228. 15. Öveçoğlu M. L., Kınıkoğlu S., "Surface Wear and Tribological Investigations of Silica Doped Alumina Ceramics", Advances in Science and Technology : Ceramics-Charting the Future, Volume3B, Editör : S. Vincenzini, TECHNA Srl., Faenza/ITALYA 1995; Proceedings of the 8th CIMTEC World Ceramics Congress and Forum on New Materials held in Florence, ITALYA, 29 Haziran - 4 Temmuz 1994, 1083-1090. 16. Öveçoğlu M. L., "Karabük Yüksek Fırın Curuflarından Geliştirilen Cam-Seramiklerin Fiziksel Özellikleri", II. International Ceramic Congress-Proceedings Book, Volume-1 Traditional Ceramics, Turkish Ceramic Society Publication No : 10, Istanbul, 24 - 28 Ekim 1994, 393-404. 17. Özer H., Öveçoğlu M. L., Kuban B., "Diopsit Esaslı Cam-Seramiklerin Mikroyapısal ve Kimyasal Özellikleri", II. International Ceramic Congress-Proceedings Book, Volume-1 Traditional Ceramics, Türk Ceramic Society Publication No : 10, Istanbul, 24 - 28 Ekim 1994, 414 - 427. 18. Yılmaz S., Öveçoğlu M. L., Özgen S., "İnce Fiber(Whisker) Şeklindeki Titanyum Karbürün (Tic)'Ün Yüksek Sıcaklıklardaki Oksitlenme Potansiyelinin İncelenmesi", Proceedings of II. International Ceramic Congress, Volume I : Engineering Ceramics, Türk Ceramic Society Publication No : 11, Istanbul, 24 - 28 Ekim 1994, 329-337. 19. Froes F. H., C. M. Ward-Close C. M., Öveçoğlu M. L., "Synthesis of Light Metals for Demanding Applications", Proceedings of 8th Internatioanl Metallurgy and Materials Congress Volume I, Editörler : N. Sevinç, T. Öztürk, M. L. Öveçoğlu, N. Güresin, M. Kiper, F. Süzen, TMMOB Turkish Chamber of Metallurgical Engineers Publication No : 32, İstanbul, 6 - 9 Haziran 1995, 533 - 538 20. Özkal B., Öveçoğlu M. L., "Başlangıç Tozlar Üzerine Gerçekleştirilen Önişlemlerin Ağır Alaşımların Sıvı Faz Sinterleme ile Üretimleri Üzerine Etkileri", Proceedings of 8th International Metallurgy and Materials Congress - Volume I, Editörler : N. Sevinç, T. Öztürk, M. L. Öveçoğlu, N. Güresin, M. Kiper, F. Süzen, TMMOB Turkish Chamber of Metallurgical Engineers Publication No : 32, İstanbul, 6 - 9 Haziran 1995, 539 - 546. 21. Arslanoğlu Z., İrdirençelebi M., Kara H., Öveçoğlu M. L., "Mekanik Alaşımlama Yöntemi ile Termodinamik Olmayan Koşullarda Demir Içerisindeki Karbon Çözünürlüğün Artırılması", Proceedings of 8th International Metallurgy and Materials Congress - Volume I, Editörler : N. Sevinç, T. Öztürk, M. L. Öveçoğlu, N. Güresin, M. Kiper, F. Süzen, TMMOB Turkish Chamber of Metallurgical Engineers Publication No : 32, İstanbul, 6 - 9 Haziran 1995, 563 - 572. 22. H. Kara H., M. İrdirençelebi M., Z. Aslanoğlu Z., Öveçoğlu M. L., "Elementel Volfram ve Karbon Tozlarının Mekanik Alaşımlama, Sinterleme Süreçleri ve Karakterizasyonu", Proceedings of 8th International Metallurgy and Materials Congress - Volume I, Editörler : N. Sevinç, T. Öztürk, M. L. Öveçoğlu, N. Güresin, M. Kiper, F. Süzen, TMMOB Turkish Chamber of Metallurgical Engineers Publication No : 32, İstanbul, 6 - 9 Haziran 1995, 563 - 572. 23. Öveçoğlu M. L., Suryanarayana C., Froes F. H., Tan M. J., "Mechanical Alloying as a Means of Providing SiC Dispersions in a Pre-alloyed Al-Matrix", Proceedings of 8th International Metallurgy and Materials Congress - Volume II, Editörler : N. Sevinç, T. Öztürk, M. L. Öveçoğlu, N. Güresin, M. Kiper, F. Süzen, TMMOB Turkish Chamber of Metallurgical Engineers Publication No : 32, İstanbul, 6 - 9 Haziran 1995, 1249 - 1257. 24. Öveçoğlu M. L., Özer H., Kuban B., "Crystallization Kinetics and Characterization of Diopside Based Glass-Ceramics", 4th Euro-Ceramics - Vol. 1 Basic Science - Developments in Processing of Advanced Ceramics - Part I, Editörler : C. Galassi, Proceedings of 4th ECERS Ceramics Congress, Gruppo Editoriale Faenza Editrice, Faenza, İTALYA, 2-6 Ekim 1995, 129-132 25. Öveçoğlu M. L., "Physical Properties of Glass-ceramics Developed from Turkish Blast Furnace Slags", 4th Euro-Ceramics - Volume 3 Basic Science - Optimization and Performance by Improved Design and Microstructural Control, Editörler : S. Meriani, V. Sergo, Proceedings of 4th ECERS Ceramics Congress, Gruppo Editoriale Faenza Editrice, Faenza, İTALYA, 2-6 Ekim 1995, 323-328 26. Öveçoğlu M. L., Upadhyaya D., Froes F. H., Osborn M., Yolton C. F., "Structural Characterization of Ti-1Al-8V-xFe (x = 5, 8, 10) Alloys", Titanium '95, Proceedings of the 8th World Conference on Titanium, Editörler : S. A. Blenkinsop, W. J. Evans and H. M. Flower, The Insitute of Materials, Birmingham, U. K., 22 - 26 Ekim 1995, 2502-2508. 27. Yılmaz S., Özgen S., Öveçoğlu M. L., "Investigation of Oxidation Behaviour of TiC-Whiskers in Al2O3-TiC Composites", Engineering Ceramics '96, NATO Advanced Research Workshop, 1215 Mayıs 1996, SLOVAKYA. 28. Öveçoğlu M. L., Froes F. H., Srisukhumbowornchai N., Chen X., Mukhopadhyay D. K., "Grain Growth Behaviour of Nanograined Gamma TiAl Compacted by Hot Isostatic Pressing", Proceedings of the International Conference on Hot Isostatic Pressing, American Society for Metals, Andover, Massachussetts, A. B. D., 20 - 22 Mayıs 1996, 227-234. 29. Froes F. H., Hoo N., Srisukhumbowornchai N., Chen X., Öveçoğlu M. L, Baburaj E. G., Senkov O. N., Taylor S. R., Dunford D., Goodwin S., Tsakiropoulus S., Baeslack W. A. III, Misra R., Mukherjee A., Vankataraman G., Tylus S., Hebeisen J., Ward-Close C. M., "Progress in the Synthesis of Lightweight Metals by Non-equilibrium Processes", Proceedings of Processing and Fabrication of Advanced Materials V, Editors : T. Srivatsan and J. J. Moore, The Minerals, Metals and Materials Society (TMS), Cincinnati, USA 30. Froes F. H., Suryanarayana C., Srisukhumbowornchai N., Chen X., Mukhopadhyay D. K., Öveçoğlu M. L., Brand K., Hebeisen J., "Processing of Nanostructured Gamma TiAl by Mechanical Alloying and Hot Pressing", Advances in the Science and Technology of Titanium Alloy Processing, Proceedings of an International Symposium, 1997, Editors : I. Weiss, S. Srinivasan, S. J. Bania and S. L. Semiatin, TMS Titanium Shaping and Forming Committees, held at the 125th TMS Annual Meeting and Exhibition, Anaheim, USA. 31. Öveçoğlu M. L., Kara H., "Elementel W ve C Tozlarından Mekanik Alaşımlama Süreçleri Sonucu Sentezlenen WC Toz Alaşımının Karakterizasyonu", 1. Ulusal Toz Metalurjisi Konferansı, Editör : S. Sarıtaş, Gazi Üniversitesi, Ankara, 16-17 Eylül 1996, 287-306. 32. Aslanoğlu Z., Kara H., Öveçoğlu M. L., "Öğütme Ortamlarının Fe-C İkili Sisteminin Mekanik Alaşımlama Süreçlerine Etkisinin İncelenmesi", 1. Ulusal Toz Metalurjisi Konferansı, Editör : S. Sarıtaş, Gazi Üniversitesi, Ankara, 16-17 Eylül 1996, 397-406. 33. Srisukhumbowornchai N., Senkov O. N., Froes F. H., Öveçoğlu M. L., Hebeisen J., "Stability of Nanocrystalline Structure in Ti-47.5Al-3Cr (at%) Alloy Produced by Mechanical Alloying and Hot Isostatic Pressing", Synthesis/Processing of Lightweight Metallic Materials II, Editörler : C. M. Ward-Close, F. H. Froes, D. J. Chellman and S. S. Chou, The Minerals, Metals and Materials Society (TMS), Cincinnati, Ohio, held at the TMS Annual Meeting in Orlando, Florida, A. B. D., 9-13 February 1997, 243-252. 34. Senkov O. N., Srisukhumbowornchai N., Froes F. H., Öveçoğlu M. L., Hoo N., Goodwin S., Tsakiropoulos T., Ward-Close C. M., "Microstructural Evolution of Mechanically Milled and Hot Isostatically Pressed Nanocrystalline Ti-47.5Al-3Cr Alloy Annealed at 1200 °C and Air Cooled", Synthesis/Processing of Lightweight Metallic Materials II, Editors: C. M. Ward-Close, F. H. Froes, D. J. Chellman and S. S. Chou, The Minerals, Metals and Materials Society (TMS), Cincinnati, Ohio, held at the TMS Annual Meeting in 35. Senkov O. N., Srisukhumbowornchai N., Öveçoğlu M. L., Hoo N., Ward-Close C.M., Goodwin S., Tsakiropoulos T., Froes F. H., "Characterization of a Ti-48Al-2Nb-2Cr Alloy Synthesized from Mixed Gas Atomized and Mechanically Alloyed Powders", Synthesis/Processing of Lightweight Metallic Materials II, Editors: C. M. Ward-Close, F. H. Froes, D. J. Chellman and S. S. Chou, The Minerals, Metals and Materials Society (TMS), Cincinnati, Ohio, TMS Annual Meeting in Orlando, USA, 9-13 February 1997, 271 - 277. 36. Senkov O. N., Srisukhumbowornchai, N., Froes F. H., Öveçoğlu M. L., Cerri E., Evangelista E., "Synthesis of TiAl-Based Intermetallics with a Nanocrystalline Structure by Mechanical Alloying and Hot Isostatic Pressing : Microstructure Stability and Properties", Advanced Particulate Materials and Processes, Editors : F. H. Froes and J. Hebeisen, Proceedings of the 5th International Conference on Advanced Particulate Materials and Processes, ASM, West Palm Beach, Florida, USA, 7-9 April 1997, 350 - 361. 37. Öveçoğlu M. L., "Toz Metalurjisi : Tarihsel Gelişim, Üretim Aşamaları ve Yeni Eğilimler", Proceedings of 9th International Metallurgy and Materials Congress - Volume I, Editörler : E. S. Kayalı, M. Ürgen, K. Şeşen, C. H. Gür, M. L. Öveçoğlu, TMMOB Metalurji Mühendisleri Odası Publication No : 33, İstanbul, 11 - 15 Haziran 1997, 449-475. 38. Özkal B., and Öveçoğlu M. L., "Ni-Fe-W Sisteminde Gerçekleştirilen Mekanik Öğütme Çalışmaları ve Elde Edilen Tozların Katı Hal Sinterleme Süreçleri", Proceedings of 9th International Metallurgy and Materials Congress - Volume I, Editörler : E. S. Kayalı, M. Ürgen, K. Şeşen, C. H. Gür, M. L. Öveçoğlu, TMMOB Metalurji Mühendisleri Odası Publication No : 33, İstanbul, 11 - 15 Haziran 1997, 487-492. 39. Öveçoğlu M. L., Senkov O. N., Srisukhumbowornchai N., Froes F. H., "Mekanik Alaşımlanmış ve Sıcak İsostatik Şartlarda Preslenmiş Nanokristal Ti-47.5Al-3Cr Alaşımının 725-1100 °C Sıcaklık Aralığında Geçirimli Elektron Mikroskop (TEM) Karakterizasyonu ve Tane Büyüme Kinetiği", Proceedings of 9th Int. Metallurgy and Materials Congress - Volume II, Editörler : E. S.Kayalı, M. Ürgen, K. Şeşen, C. H. Gür, M. L. Öveçoğlu, TMMOB Metalurji Mühendisleri Odası Pub. No : 33, İstanbul, 11-15 Haz. 1997, 1335-1340. 40. Öveçoğlu M. L., Senkov O. N., Srisukhumbowornchai N., Froes F. H., "Mekanik Alaşımlanmış ve Sıcak İsostatik Şartlarda Preslenmiş Nanokristal Ti-47.5Al-3Cr Alaşımının T = 1200 °C Sıcaklığındaki Isıl İşlemi ve Havada Soğutulması Sonucu Oluşan Mikroyapısal Değişimi", Proceedings of 9th International Metallurgy and Materials Congress - Volume II, Editörler : E. S. Kayalı, M. Ürgen, K. Şeşen, C. H. Gür, M. L. Öveçoğlu, TMMOB Metalurji Mühendisleri Odası Pub. No : 33, İstanbul, 11-15 Haz. 1997, 1391-1396. 41. Öveçoğlu M. L., Nix W. D., "Identification of Dispersoid and Precipitate Phases in a Mechanically Alloyed Rapidly Solidified Al-8.4Fe-3.4Ce Alloy Using TEM and EDS Techniques", Proceedings of 13th National Electron Microscopy Congress with International Participation, Editors: E. Tekin & Y. Canberk, Ankara, 1-4 Sept. 1997, 650-655. 42. Özkal B., Öveçoğlu M. L., "A Comparison Analysis of Sintered Ball Milled and Attritor Milled Heavy Alloy Powders via SEM, TEM and EDS Studies", Proceedings of 13th National Electron Microscopy Congress with International Participation, Editors: E. Tekin & Y. Canberk, Ankara, 14 September 1997, 850-855. 43. Öveçoğlu M. L.,ve Aslanoğlu Z., "Characterization of a High Carbon Fe-C Alloy during Attrition Milling and Sintering using SEM, TEM and EDS Techniques", Proceedings of 13th National Electron Microscopy Congress with International Participation, Editors : E. Tekin & Y. Canberk, Ankara, 1-4 September 1997, 856-861. 44. Öveçoğlu M. L, Senkov O. N., Srisukhumbowornchai N., Froes F. H., "Characterization and Grain Growth Kinetics of Mechanically Milled Nanocrystalline Ti-47.5Al-3Cr Alloy Annealed in the Range 725 °C - 1200 °C using TEM Techniques", Proceedings of 13th National Electron Microscopy Congress with International Participation, Editors : E. Tekin & Y. Canberk, Ankara, 14 September 1997, 862-867. 45. Aslanoğlu Z., Fındık F., Öveçoğlu M. L., Karakaş Y., "W-35Ag Elektrik Kontak Malzemesinin Toz Metalurjisi Üretim Sürecinin İncelenmesi ve Mikroyapısal Karakterizasyonu", IV. Seramik Kongresi, Editörler : Servet Turan, Ferhat Kara ve Ersan Pütün, Eskişehir, 22-25 Eylül 1998, 803808. 46. Özkal B., Öveçoğlu M. L., "Mechanical Milling Studies in the Ni-Fe-W System and the Sintering Behaviours in Heavy Alloys", Proceedings of the 1998 Powder Metallurgy World Congress & Exhibition - Volume 1, Granada, İSPANYA, 18-22 Ekim 1998, 287 - 292. 47. Öveçoğlu M. L., Senkov O. N., Srisukhumbowornchai N., Froes F. H., "Microstructural Evolution of a Nanocrystalline Ti-47.5Al-3Cr Alloy in the Annealing Range 725 °C - 1200 °C Produced by Mechanical Alloying and Hot Isostatic Pressing", Proceedings of the 1998 Powder Metallurgy World Congress & Exhibition - Volume 1, Granada, İSPANYA, 18-22 October 1998, 305 - 310. 48. Öveçoğlu M. L., Kara H., Özkal B., "Microstructural Characterization of a WC Powder Alloy Synthesized from Elemental W and C Powders by Mechanical Alloying", Proceedings of the 1998 Powder Metallurgy World Congress & Exhibition - Volume 1, Granada, İSPANYA, 18-22 October 1998, 455 - 460. 49. Senkov O. N., Srisukhumbowornchai N., Öveçoğlu M. L., Froes F. H., "Synthesis and Characterization of Titanium Aluminide Based Compounds with Nanocrystalline and Bimodal Structures ", Proceedings of the 1998 Powder Metallurgy World Congress & Exhibition - Volume 1, Granada, İSPANYA, 18-22 October 1998, 609 - 614. 50. Senkov, O. N., Froes, F. H., Srisukhumbowornchai, N. and Ovecoglu, M. L., Grain growth in titanium-aluminide-based alloys with nanocrystalline and microcrystalline structures, in H. Weiland, B. L. Adams and A. D. Rolett (eds.), Grain Growth in Polycrystalline Materials III, TMS, Warrendale, PA, 1998, 701–706. 51. Senkov O. N., Çavuşoğlu M., Popescu G., Öveçoğlu M. L., Froes F. H., "Development and Characterization of a TiAl/Ti5Si3 Composite with a Submicrocrystalline Structure", Synthesis of Lightweight Metals III, Editörler : F. H. Froes, C. M. Ward-Close, S. G. McCormick, D. Eliezer, The Minerals, Metals & Materials Society, A. B. D., 1999, 51 - 58. 52. Çavuşoğlu M., Öveçoğlu M. L., Senkov O. N., Froes F. H., İnal O., "Compaction of Advanced Materials", Synthesis of Lightweight Metals III, Editörler : F. H. Froes, C. M. Ward-Close, P. G. McCormick, D. Eliezer, The Minerals, Metals & Materials Society, A. B. D., 1999, 267 - 274. 53. Özkal B., Upadhyaya A., Öveçoğlu M. L., German, "Comparative Effects of Coated Powders on the Sintering Behaviors of W-Cu Alloys", Uluslararası Katılımlı 2. Toz Metalurjisi Konferansı, Editör : S. Sarıtaş, Ankara, 15-17 Eylül 1999, 185-191. 54. J. I. Qazi J. I., J. Rahim J., O.N. Senkov O. N., F.H. Froes F. H., M. L. Öveçoğlu M. L., Genç A., "Production and Characterization of Fully Dense Hydrogenated -TiAl by Blended Elemental Approach", Powder Metallurgy Alloys & Particulate Materials For Industrial Applications, Proceedings of the Fall TMS 2000 Meeting, Editörler : D. E. Warrendale, PA, 2000, 95-104 Alman & J.W. Newkirk, A. B. D., TMS. 55. Özen G., Demirata B., Öveçoğlu M. L., "Thermal and Optical Properties of Tm3+ doped Tellurite Glasses", 13th Workshop: Advanced Topics in Luminescence Spectroscopy Temmuz 2000, Erice, Sicily, İTALYA 56. Özkal B., Upadhyaya A., Öveçoğlu M. L., German R. M.,, "Effect of Copper Coated Tungsten Powders during Infiltration Densification of the W-Cu System", Expanding Horizon of Powder Metallurgy, Proceedings of the 29th National P/M Conference and Annual Technical Meeting of the Powder Metallurgy Association of India (PMAI), Goa, HİNDİSTAN, 30-31 Ocak 2003. 57. Gökçe H., Öveçoğlu M. L., "İleri Teknoloji Uygulamaları için Doğal Hammaddelerden ve Sentetik Tozlardan Kordiyerit Seramiklerinin Geliştirilmesi ve Karakterizasyonu", 10. Denizli Malzeme Sempozyumu ve Sergisi, 14 – 16 Nisan 2004, Denizli. 58. Akkaş H. D., Öveçoğlu M. L., Tanoğlu M.., "Active / Inert Filler Reinforced Ceramic Matrix Composites Processed from the Pyrolysis of Poly(Phenyl)Siloxane", 10. Denizli Malzeme Sempozyumu ve Sergisi, 14 – 16 Nisan 2004, Denizli. 59. Turan P., Özkal B. and Ovecoglu M. L., "Preparation of Ni-B coated W composite powders and their comparative Liquid phase sintering behaviors", poster presented in PM2TEC, 2004 Advances in Powder Metallurgy and Particulate Materials, International Conference on Powder Metallurgy and Particulate Materials, 13 - 17 June 2004. Chicago, U. S. A. 60. Özkal B., Upadhyaya A., Ovecoglu M. L. and German R. M., "Realtime sintering observations in W-Cu system : Accelerated rearrengement densification via copper coated tungsten powders approach", presented in PM 2004 Powder Metallurgy World Congress, 17-21 October 2004, Vienna, Austria. 61. Gökçe H., Boyraz T., Keçeli Z., Öveçoğlu M. L., Addemir O., "Microstructural and Physical Characterization of Aluminium Titanate/ Cordierite Ceramics", Basic science, design, modelling and simulation, Editörler : J. G. Heinrich ve C. G. Aneziris, Proceedings of the 10th International Conference of the European Ceramic Society, 17 - 21 June 2007, Berlin, pp. 69 -74. 62. Keçeli Z., Turkmen H.S., Boyraz T., Addemir O., Ovecoglu M.L. "Numerical Simulation of the Ballistic Performance of B4C-SiC Ceramic Composites for Armor Applications", Basic science, design, modelling and simulation, Editörler : J. G. Heinrich ve C. G. Aneziris, Proceedings of the 10th International Conference of the European Ceramic Society, 17 - 21 June 2007, Berlin, pp. 154 -158. 63. Tarçın B., Günday M., Sazak-Övecoğlu H., Türkmen C., Övecoğlu M.L., Öksüz M., Ay M. ,"Evaluation of Tensile Bond Strengths of Ceramic-Based Restorative Materials on Acid or Laser Etched Dentin Surfaces", Bioceramics, Editörler : J. G. Heinrich ve C. G. Aneziris, Proceedings of the 10th International Conference of the European Ceramic Society, 17 - 21 June 2007, Berlin, pp. 985 -988. 64. Sınmazışık G., Tırakyalı G., Gülmez T., Öveçoğlu M.L., "Failure Load of Zirconia Based Three-Unit Fixed Partial Bridge Substructures Fabricated by Using Vita In-Ceram Sprint Technique", Bioceramics, Editörler : J. G. Heinrich ve C. G. Aneziris, Proceedings of the 10th International Conference of the European Ceramic Society, 17 - 21 June 2007, Berlin, pp. 989 -994. 65. Ünal N., Özkal B., Öveçoğlu M.L., "Characterization Investigations of a Mechanically Alloyed W - B4C (2 wt%) - C (1 wt%) Nanocomposite", Nanomaterials, Editörler : J. G. Heinrich ve C. G. Aneziris, Proceedings of the 10th International Conference of the European Ceramic Society, 17 21 June 2007, Berlin, pp. 1465 -1470. 66. Kalpaklı Y., Öveçoğlu M.L., "Effect of TiO2 Addition and In-Situ Phase Formation on Corrosion Mechanism of Zero-Cement Castables (ZCC)", Refractories, Editörler : J. G. Heinrich ve C. G. Aneziris, Proceedings of the 10th International Conference of the European Ceramic Society, 17 - 21 June 2007, Berlin, pp. 1886 -1890. 67. Dombaycı A., Kalpaklı Y.K., Öveçoğlu M.L., "Effects of Particle Size Distribution on the Refractory Properties and Corrosion Mechanism of Zero-Cement Castables (ZCC)", Refractories, Editörler : J. G. Heinrich ve C. G. Aneziris, Proceedings of the 10th International Conference of the European Ceramic Society, 17 - 21 June 2007, Berlin, pp. 1891 -1896. 68. Kalpaklı Y.K., Dombaycı A., Öveçoğlu M.L., "Role of ZrO2 Addition on the Refractory Properties and Corrosion Mechanism of Zero-Cement Castables (ZCC)s", Refractories, Editörler : J. G. Heinrich ve C. G. Aneziris, Proceedings of the 10th International Conference of the European Ceramic Society, 17 - 21 June 2007, Berlin, pp. 1903 -1908. 69. Tatar D., Öveçoğlu M.L., Özen G., Erim-Berker B., "Thermal Properties and Crystallization Behavior of (1-x)TeO2 + (x)CdF2 Glasses", Transparent ceramics, Editörler : J. G. Heinrich ve C. G. Aneziris, Proceedings of the 10th International Conference of the European Ceramic Society, 17 - 21 June 2007, Berlin, pp. 2308 -2312. 70. Tatar D., Kaygusuz H., Tezcan F., Erim B., Öveçoğlu M. L., Özen G., "Y2O3 Nanophosphors Synthesized by Combustion and Thermal Decomposition Techniques", Proceedings of 11th Annual Conference on NanoScience and NanoTechnology - Paper No : 1178 , NSTI-NanoTech, BostonUSA, June 1-5/2008 June 1-5, 2008, Boston, Massachusetts, U.S.A. Nanotechnology Conference and Trade Show NSTI NANOTECH 2008, Vol 1, Technical Proceedings- mMterials, Fabrication, Particles and Characterızation, 2008, 959 - 961. 71. Öğünç H., Keçeli Z., Boyraz T., Addemir O., Öveçoğlu M. L., "Effects of B4C Addition on the Microstructure and Mechanical Properties of Hot Pressed SiC Ceramic Matrix Composites", Theme 3 ; Mobility and Transportation, Global Roadmap for Ceramics, Road-map Editor: Stuart Hampshire; ICC2 Proceedings, June 29th - July 4th, 2008 Verona, 4-O14-ID 447. 72. Gökçe H., Boyraz T., Keçeli Z., Öveçoğlu M. L., Addemir O., "Thermal Characterization of Aluminium Titanate/ Cordierite Ceramics", Theme 1 - Electro - Magnetic - Optical - Ceramics And Devices, Global Roadmap for Ceramics, Road-map Editor: Michael Hoffmann ; ICC2 Proceedings, June 29th - July 4th, 2008 Verona, 1-P113-ID 402. 73. Ünal N., Öveçoğlu M. L., "The Influence of B4C Addition on Microstructure and Physical Properties of W and WC Matrix Composites", 5th International Powder Metallurgy Conference, Ankara, 2008. 74. Gökçe H,. Boyraz T., Keçeli Z., Öveçoğlu M. L., Addemir O., "Alüminyum/Titanata/Kordiyerit Seramiklerin Mekanik Özelliklerinin Karakterizasyonu", Editörler : O. Yücel, A. Öztürk, H. Sesigür, 14. Uluslararası Metalurji ve Malzeme Kongresi Bildiriler Kitabı, 16 - 18 Ekim 2008, İstanbul, 889 - 895. 75. Çoşkun S., Genç A., Öveçoğlu M. L., "Development and Characterization Investigations of Mechanically Alloyed W-Ni/TiC Composites", EPD Congress 2009, Editör : S. M. Howard, Proceedings of 138th TMS Annual Meeting and Exhibition, San Fransisco, A. B.D., 15-19 Şubat 2009, 183 - 190. 76. Kaftelen H. Ünlü N., Öveçoğlu M. L., Henein H., "Microstructural Characterization and Physical Properties of TiC Reinforced Al-Cu matrix Alloy Composites", Supplemental Proceedings Volume 3 : General Paper Selections, TMS2009, Proceedings of 138th Annual Meeting and Exhibition, San Fransisco, A. B.D., 15-19 Şubat 2009, 271 - 278. 77. Yumakgil H. K., Gökçe H., Özkal B., Gürmen S., Öveçoğlu M. L., "Optimization of Milling Conditions for the Production of Fine Siver Powders", Supplemental Proceedings Volume 3 : General Paper Selections, TMS2009, Proceedings of 138th Annual Meeting and Exhibition, San Fransisco, A. B.D., 15-19 Şubat 2009, 771 - 776. 78. Genç A., Coşkun S., Öveçoğlu M. L., "Development and Characterrization Investigations of Mechanically Alloyed and Sintered W-2 WT% VC-1 WT% Nİ Composites", Advances in Powder Metallurgy & Particulate Materials, Part 8-Refractory Metals, Carbides & Ceramics, Proceedings of the 2009 International Conference on Powder Metallurgy & Particulate Materials, Las Vegas, A. B. D. , 28 Haziran - 1 Temmuz 2009, 8-35 - 8-49. 79. Coşkun S., Genç A., Öveçoğlu M. L., "Development and Characterization Investigations of Mechanically Alloyed W-Mn-VC Composites", Advances in Powder Metallurgy & Particulate Materials, Part 8-Refractory Metals, Carbides & Ceramics, Proceedings of the 2009 International Conference on Powder Metallurgy & Particulate Materials, Las Vegas, A. B. D. , 28 Haziran - 1 Temmuz 2009, 8-50 - 8-64. 80. Genç, A., Coşkun, S., Öveçoğlu, M.L., Production of TiC/VC Dispersed W-Ni Nano Composites, International Conference on Nanomaterials and Nanosystems, İstanbul, Turkey, 10-13 August 2009, pp: 23. 81. Sönmez T., Özkaya D. H., Coşkun S., Öveçoğlu M. L., "Development and Characterization Investigations of Yttria Partially Stabilized Zirconia (Y-PSZ) via High Energy Milling", Advances in Powder Metallurgy & Particulate Materials, Part 9-Advanced Particulate Materials & Processes, Proceedings of the 2009 International Conference on Powder Metallurgy & Particulate Materials, Las Vegas, A. B. D. , 28 Haziran - 1 Temmuz 2009, 9-85 - 9-100. 82. Genç, A., Coşkun, S., Öveçoğlu, M.L., Microstructural Characterizations of Mechanically Alloyed and Sintered W - TiC - Ni Composites, SERES 09, I. International Ceramic, Glass, Porcelain Enamel, Glaze and Pigment, Eskişehir, Turkey, 12-14 October 2009, pp: 1202. 83. Kaftelen H., Ünlü N., Öveçoğlu M. L., Henein H., "Microstructural Evaluation of ZrC Reinforced Al-Cu Matrix Alloy Composites Fabricated by Mechanical Alloying and Vacuum Hot Pressing", Supplemental Proceedings : Volume 2 : Materials Characterization, Computation, Modeling and Energy TMS (The Minerals, Metals &Materials Society) 2010, Proceedings of 139th Annual Meeting and Exhibition, Seattle, A. B.D., 14-18 Şubat 2010, 189 - 197. 84. Yakar S. S, Söyler A. U., Özkal B. , Gürmen S., Öveçoglu M. L., "Evaluation of High Energy Milling Behavior of ZnO Powders in Different Milling Conditions", Supplemental Proceedings : Volume 3 : General Paper Selections TMS (The Minerals, Metals &Materials Society) 2010, Proceedings of 139th Annual Meeting and Exhibition, Seattle, A. B.D., 14-18 Şubat 2010, 769 777. 85. Ağaoğulları D., Gökçe H., Genç A., Duman İ., Öveçoğlu M. L., "Characterization of Mechanically Alloyed and Sintered ZrC particulate Reinforced Al Matrix Composites", METAL 2010: Bildiriler Kitabı, 19th International Conference on Metallurgy and Materials, Mayıs 18-20, 2010 Roznov Pod Radhostem, Çek Cumhuriyeti, 2010, 702-708. 86. Ulutaş K., Değer D., Kalkan N., Yıldırım S., Çelebi Y. G., Iskarlatos Y., Öveçoğlu M. L., Genç A., "Structural properties of In-In2O3 composite films", 11th Europhysical Conference on Defects in Insulating Materials (EURODIM 2010), IOP Conf. Series: Materials Science and Engineering 15 (2010) 012095 Bildiriler Kitabı, 2010, 1 - 7. 87.Özenler S., Şahin N., Akaydın, B., Öveçoğlu M. L., Genç A., Leger, J-M., Napporn, T. W., Kadırgan, F., Comparison of the ORR Activity of Carbon Supported PtCo/C and PtSnCo/C Electrocatalysts for PEM Fuel Cells”, Polymer Electrolyte Fuel Cells 11, Book Series : ECS Transactions 41(1), (2011), 1031-1042, DOI: 10.1149/1.3635635, Proceedings of the 11th Polymer Electrolyte Fuel Cell Symposium (PEFC) Under the Auspices of the 220th Meeting of the ECS, Editors : Gasteiger, H. A., Weber A., Narayanan 88. Balcı Ö., Demirkan O. U., Ağaoğulları D., Gökçe, H., Genç A., Öveçoğlu M. L., Duman, İ., “Effects of La2O3 Addition on the Microstructure and Properties of Activated Sintered W-Ni Compacts”, Solid Compounds of Transition Elements III, Book Series: Solid State Phenomena, 194, (2013), 217 – 221, DOI:10.4028/www.scientific.net/SSP.194.217, Proceedings of the 18th International Conference on Solid Compounds of Transition elements (SCTE 2012), Editors : Verbovytskyy, Y., Goncalves, A. P., Lisbon Uni. 89. Ağaoğulları D., Balcı Ö., Demirkan O. U. Gökçe, H., Genç A., Öveçoğlu M. L., Duman, İ., “Development of Mechanically Alloyed and Sintered W-1 wt.% Ni Matrix Composites Reinforced with TiB2”, Solid Compounds of Transition Elements III, Book Series: Solid State Phenomena, 194, (2013) 194-198 DOI:10.4028/www.scientific.net/SSP.194.194, Proceedings of the 18th International Conference on Solid Compounds of Transition elements (SCTE 2012), Editors : Verbovytskyy, Y., Goncalves, A. P., Lisbon Universit Diğer yayınlar 1. Özen G., Kaygusuz H., Öveçoğlu M. L., "Formation and Transformation in the Molecular Units in Tellrium based Oxide Glasses", in Frontier Developments in Optics and Spectroscopy, Editörler : B. di Bartolo ve O. Forte, Google Books, 2008. 2. Kaftelen H., Öveçoğlu M. L., Çimenoğlu H., Henein H., "Chapter 7 - Microstructural Characterizationj and Wear Properties of Mechanically Alloyed and Sintered Al - 4 wt% Cu Alloy Composites reinforced with TiC and ZrC Particulates" im Engineered Metal Matrix Composites : Forming Methods, Material Properties and Industrial Applications, Editör : Luca Magagnin, NOVA Publishers, ISBN : 978-1-62081-719-3, Kasım 2012. Düzenleme Tarihi :03/09/2013