Özgeçmiş PDF indir - Mühendislik Mimarlık Fakültesi
Transkript
Özgeçmiş PDF indir - Mühendislik Mimarlık Fakültesi
TÜBİTAK 2237 – Proje Eğitimi Etkinliklerini Destekleme Programı ÖZGEÇMİŞ 1. Genel Düzenleme Tarihi: 20/10/2013 Unvanı Adı Soyadı : Prof. Dr. Erdal ÇELİK Yazışma Adresi: Dokuz Eylül Üniversitesi, Mühendislik Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümü, Üretim Metalurjisi Anabilim Dalı, 35160, Buca, İzmir Doğum Tarihi ve Yeri: 23/11/1967 Tel: 0.232.301 7459/0.232.301 7445 GSM: 0535.8614273 E-Posta: erdal.celik@deu.edu.tr Faks: 0.232.301 7452 2. Eğitim: (Son aldığınız dereceden / diplomadan başlayarak yazınız) Öğrenim Dönemi Üniversite Derece (*) Öğrenim Alanı Haziran 2000 Doktora Florida State University (ABD) ve Sakarya Üniversitesi (Turkiye) Metalurji Mühendisliği Eylül 1995 Y. Lisans Sakarya Üniversitesi (SAU) Metalurji Mühendisliği Haziran 1993 Lisans İstanbul (İTÜ) Metalurji Mühendisliği Teknik Üniversitesi (*) Diploma Türü (Lisans, Y.Lisans, Doktora) 3. Akademik ve Mesleki Deneyim: Görev Dönemi Unvan Üniversite Bölüm 2010- Prof. Dr. Dokuz Eylül Üniversitesi Metalurji ve Malzeme Mühendisliği 2005-2010 Doç. Dr. Dokuz Eylül Üniversitesi Metalurji ve Malzeme Mühendisliği 2002-2005 Yrd. Doç. Dr. Dokuz Eylül Üniversitesi Metalurji ve Malzeme Mühendisliği 2001-2002 Öğretim Görevlisi Dokuz Eylül Üniversitesi Metalurji ve Malzeme Mühendisliği 1997-2000 Araştırma Görevliliği Florida State University (USA) Magnet Bilimi ve Teknolojisi 1994-2001 Araştırma Görevliliği Sakarya Üniversitesi Metalurji ve Malzeme Mühendisliği 4. TÜBİTAK İle Olan İlişki: Yürürlükte olan 1001 proje sayısı Reddedilmiş olan 1001 başvuru sayısı Başarı ile tamamlanmış olan 1001 proje sayısı 1001 programı dışındaki TÜBİTAK programlarına ilişkin, yürürlükte olan proje sayısı, reddedilen proje sayısı ve başarı ile tamamlanmış proje sayısı TÜBİTAK programları kapsamında yapmış olduğunuz panelist/hakem görev 43 sayısı Daha önce 2237 programı kapsamında kaç eğitim etkinliğinde yer aldınız? 5. Proje Eğitimi Konusundaki Bilgiler: Proje Eğitimi konusunda akademik ders vermekte misiniz?/verdiniz mi? Proje Eğitimi ile ilgili seminer/eğitim aldıysanız, eğitime ilişkin bilgiler Herhangi bir proje eğitiminde eğitmen/danışman olarak yer aldıysanız, eğitime ilişkin bilgiler Daha önce 2237 programı kapsamında kaç eğitim etkinliğinde yer aldınız? 6. Yayın Bilgileri ISI indeksine kayıtlı dergilerde yayımlanan makale sayısı 171 Diğer indekslere kayıtlı / Hakemli dergilerde yayımlanan makale sayısı 37 İndekslere kayıtlı / Hakemli konferans kitaplarında yayınlanan bildiri sayısı 133 Diğer yayınlar 4 TOPLAM 345 7. Yayınlarınıza aldığınız toplam atıf sayısı (Web of Science‘a göre) : 8. Seçilmiş yayınlarınız: ( Araştırma konusuyla ilgili en önemli 5 yayınınızı referans formatında aşağıya yazınız) Yazarlar Makale Başlığı Dergi H. YILMAZ ATAY, L. ERAL DOGAN and E. CELIK, “Investigation of Self-healing Property of Chitosan Reinforced Epoxy Dye Composite Coatings” Journal Materials of vol. 213, pp. 8-15 January 2013. S. KAÇMAZ, K. ERTEKİN, M.GÖÇMENTÜRK, A. SÜSLÜ, Y. ERGUN and E. ÇELİK “Selective Sensing of Fe3+ at Pico-molar Level with Ethyl Cellulose Based Electrospun Nanofibers” Reactive and Functional Polymers vol. 73, pp.674-682 March 2013 M. EROL and E. CELIK “Graphite Flake-Carbon Black Reinforced Polystyrene Matrix Composite Films Deposited on Glass Fiber Woven Fabrics as Plane Heaters” Materiali in Tehnologije/M aterials and Technology vol. 47, pp. 25-28 March 2013 A. PASINLI, O.CULHA, E. CELIK and M. TOPARLI ”A Model for the Calculation of Mechanical Properties of Hydroxyapatite Coatings on Ti6Al4V Substrate Using Finite Element Methods” Mathematical and Comptational Applications vol. 16, pp. 136-147 January 2011 E. CELIK “Ho2O3-ZrO2 Insulation Coatings on AgMg Sheathed Bi-2212 Superconducting Tapes by Sol-gel Technique for Magnet Technology” Journal of Sol-gel Science and Technology vol. 53, pp. 561-569 March 2010 Cilt Sayfa Sayı / / Tarih 9. Son 5 yılda yapmış olduğunuz yayınların listesi: YAYINLAR Uluslararası hakemlİ dergİ/proceeding 1-(*) A. ŞAKAR-DELIORMANLI, E. CELIK and M. POLAT, “Preparation of Pb(Mg1/3Nb2/3)O3 Films by Aqueous Tape Casting”, Journal of the European Ceramic Society, vol. 29, pp. 115-123, January 2009. 2-(*) A. ŞAKAR-DELIORMANLI, M. POLAT and E. CELIK, “Influencing of Dispersing Agents on the Solubility of Perovskite in Water”, Journal of Dispersion Science and Technology, vol. 30, pp. 4-10, January 2009. 3-(*) E. CELIK, I. BIRLIK and Y. KARAKAS, “Synthesis of NiCrAl/MgO-ZrO2 Cermet Powders by Chemical Method for Functionally Gradient Materials”, Journal of Materials Processing Technology, vol. 209, pp. 695-699, January 2009. 4-(*) O. SAYMAN, F. SEN, E. CELIK and Y. ARMAN, “Thermal stress analysis of WC-Co/Cr-Ni multilayer coatings on 316L steel substrate during cooling process”, Materials and Design, vol. 30, pp. 770-774, January 2009. 5-(*) M. TOPARLI, E. CELIK, I. KAYATEKIN, E. DOKUMACI, M. I. MUGLALI and N. F. AK AZEM, “Tribological Properties of Electric Arc Sprayed CuSn Coating for Bearing Elements”, Tribology Transaction, vol.52, pp.389-394, March 2009. 6-(*) O.CULHA, D.YILMAZ, M.TOPARLI, H.S. SOYKAN, E.CELIK and T.AKSOY, “Indentation Size Effect on Mechanical Properties of HVOF Sprayed WC Based Cermet Coatings for a Roller Cylinder”, Surface Coatings and Technology, vol. 2003, pp.2052-2057, March 2009. 7-(*) M. EROL, Y. OZTURK, I. AVGIN and E. CELIK, “Production, Characterization and Magnetic Properties of BismuthSubstituted Yttrium Iron Garnet Layers Prepared by Sol–Gel Process”, Applied Physics:Conference Series, vol. 153, pp.012049, April 2009. 8-(*) E. CELIK, U. AYBARC, M.F. EBEOGLUGIL, I. BIRLIK and O. CULHA, “ITO Films on Glass Substrate by Sol-gel Technique: Synthesis, Characterization and Optical Properties”, Journal of Sol-gel Science and Technology, vol. 50, pp. 337347, May 2009. 104-(*) O. CULHA, M.F. EBEOGLUGIL, I. BIRLIK, E. CELIK and M. TOPARLI, “Synthesis, Characterization and Optical Properties of Tin Oxide Thin Films on Glass Substrate by Sol-Gel Technique for Gas Sensors”, Journal of Materials Processing Technology, vol. 51, pp. 32-51, May 2009. 9-(*) A. CIRELI AKSIT, N. ONAR, M.F. EBEOGLUGIL, I. BIRLIK, E. CELIK and I. OZDEMIR, "Electromagnetic and Electrical Properties of Coated Cotton Fabric with Barium Ferrite Doped Polyaniline Film", The Journal of Applied Polymer Science, vol. 113, pp. 358-366, June 2009. 10-(*) N. ONAR, A. CIRELI AKSIT, M.F. EBEOGLUGIL, I. BIRLIK, E. CELIK and I. OZDEMIR, "Structural, Electrical and Electromagnetic Properties of Cotton Fabrics Coated with Polyaniline and Polypyrrole”, The Journal of Applied Polymer Science, vol. 114, pp. 2003-2010, August 2009. 11-(*) A. ŞAKAR-DELIORMANLI, E. CELIK and M. POLAT, “Solubility and Aging of Lead Magnesium Niobate in Water”, Ceramic International, vol. 35, pp. 503-508, September 2009. 12-(*) E. CELIK, “Ho2O3-ZrO2 Insulation Coatings on AgMg Sheathed Bi-2212 Superconducting Tapes by Sol-gel Technique for Magnet Technology”, Journal of Sol-gel Science and Technology, vol. 53, pp. 561-569, March 2010. 13-(*) I. BIRLIK and E. CELIK, “Characterization of Buffer Layers on Ni Substrates for YBCO Coated Conductors”, Canadian Metallurgical Quarterly, vol. 49, pp. 81-89, January 2010. 14-(*) A. PASINLI, M. YÜKSEL, E. CELIK. S. SENER, and A.C.TAS, “A New Approach in Biomimetic Synthesis of Calcium phosphate Coatings using Lactic acid-Na Lactate Buffered Body Fluid Solution”, Acta Biomaterialia, vol. 6, pp. 2282-2288, May 2010. 15-(*) I. BIRLIK, M ERBE, T. FREUDENBERG, E. CELIK, L. SCHULTZ and B. HOLZAPFEL, “Flux Pinning Improvement of YBCO Superconducting Films with BaZrO3 Nanoparticles Prepared by Chemical Solution Deposition Method”, Journal of Physics: Conference Series, vol. 234, pp. 012004, August 2010. 16-(*) H. YILMAZ ATAY and E. CELIK, “Use of Turkish Hydromagnesite & Huntite Minerals in Plastic Materials as a Flame Retardant”, Polymer Composite, Vol. 31, pp. 1692-1700, June 2010. 17-(*) M. TOPARLI, O. SAYMAN and E. CELIK, “Numerical Investigation of Residual Stresses in YBCO/CeO2/YSZ/CeO2/Ni Architextured Materials for Coated Conductors”, Mathematical and Comptational Applications, vol. 16, pp. 125-135, January 2011. 18-(*) A. PASINLI, O.CULHA, E. CELIK and M. TOPARLI, ”A Model for the Calculation of Mechanical Properties of Hydroxyapatite Coatings on Ti6Al4V Substrate Using Finite Element Methods”, Mathematical and Comptational Applications, vol. 16, pp. 136-147, January 2011. 19-(*) A. OKUR, R. YİĞİT, E. CELIK, and O. SAYMAN, “Thermal Stress Analysis in ZrO2 Insulation Coatings on Cr-Ni Substrates During Cooling Process”, Mathematical and Comptational Applications, vol. 16, pp. 598 - 604, January 2011. 20-(*) N. LKHAGVAJAV, I.YASA, E. CELIK, M. KOIZHAIGANOVA and O. SARI, ”Antimicrobial Activity of Colloidal Silver Nanoparticles Prepared by Sol-gel Method”, Digest Journal of Nanomaterials and Biostructures, vol. 6, pp. 149-154, February 2011. 21-(*) S. KAÇMAZ, K. ERTEKİN, A. SÜSLÜ, M. ÖZDEMİR, Y. ERGUN, E. CELIK and U. CÖCEN, “Emission Based Subnanomolar Silver Sensing with Electrospun Nanofibers”, Sensor and Actuators B: Chemical, vol. 153, pp.205-213, March 2011. 22-(*) O. SANCAKOGLU, O.CULHA, B. AGADAY, M. TOPRARLI and E. CELİK, “Co-deposited Zn-Submicron Sized Al2O3 Composite Coatings: Production, Characterization and Micromechanical Properties”, Materials and Design, vol. 32, pp. 4054-4061, April 2011. 23-(*) S. AYDOĞDU, K. ERTEKİN, A. SÜSLÜ, M. ÖZDEMİR, E. ÇELİK and U. CÖCEN, “Optical CO2 Sensing with Ionic Liquid Doped Electrospun Nanofibers”, Journal of Fluorescence, vol. 21, pp. 607-613, December 2011. 24-(*) Y. ÖZTURK, M. EROL, E. ÇİNKILIÇ, E. ÇELİK and I. AVGIN, “Production of Cerium and Bismuth Doped Yttrium Iron Garnet Thin Films with Unusual Magnetic Properties Using Sol-gel Method”, International Journal of Material Science and Electronic Research, Vol. 2, pp. 25-31, December 2011. 25-(*) M.KOIZHAIGANOVA, N.LKHAGVAJAV, I.YAŞA and E.CELIK, “New Gelatin-Hydroxyapatite Nanocomposite Films Containing Nano Silver: Synthesis, and, Mechanical and Antimicrobial Properties”, Journal of Bionanoscience, 2011 (published). 26-(*) S. KAÇMAZ, K. ERTEKİN, A. SÜSLÜ, Y. ERGUN, E. ÇELİK and U. CÖCEN, “Sub-nanomolar Sensing of Ionic Mercury with Polymeric Electrospun Nanofibers”, Materials Chemistry and Physics, vol. 133, pp. 457-552, February 2012. 27-(*) A. GURBUZ, N. ONAR, İ. OZDEMİR, A.C. KARAOGLANLI and E. CELİK, “Structural, Thermal and Magnetic Properties of Barium-Ferrite Powders Substituted with Mn, Cu or Co and X (X=Sr and Ni) Prepared by the Sol-Gel Method”, Materiali in Tehnologije/Materials and Technology, vol. 46(3), pp.305-310, June 2012. 28-(*) I.YAŞA, N.LKHAGVAJAV, M.KOIZHAIGANOVA, E.CELIK and O. SARI, “Assessment of Antimicrobial Activity of Nanosized Ag-TiO2 Colloids”, World Journal of Microbiology and Biotechnology, 2012 (published). 29- E. CELIK, F. OZTOPRAK, M.F. EBEOGLUGIL, I. BIRLIK, R. YIGIT, M. TANOGLU and M.H. ASLAN, “Synthesis, Characterization and Optical Properties of ZnO-CuO-Al2O3 Semiconducting Films on Glass Substrates by Sol-Gel Technique”, Journal of Material Sciences, vol. 2, pp. 9-36, December 2012. 30- (*) H. YILMAZ ATAY and E. CELIK, “Electrical Behaviours of Flame Retardant Huntite and Hydromagnesite Reinforced Polymer Composites”, ISRN Polymer Science, pp. 1-9, December 2012. 31-(*) A. GOKTAS, I.H. MUTLU, Y. YAMADA and E. CELIK, “Influence of pH on the Structural, Optical and Magnetic Properties of Zn1-xMnxO4 Thin Films Grown by Sol-gel Method”, J. Alloys and Compounds, vol. 553, pp.259-266, January 2013. 32- (*) H. YILMAZ ATAY, L. ERAL DOGAN and E. CELIK, “Investigation of Self-healing Property of Chitosan Reinforced Epoxy Dye Composite Coatings”, Journal of Materials, vol. 213, pp. 8-15, January 2013. 33-(*) S. KAÇMAZ, K. ERTEKİN, M.GÖÇMENTÜRK, A. SÜSLÜ, Y. ERGUN and E. ÇELİK, “Selective Sensing of Fe3+ at Pico-molar Level with Ethyl Cellulose Based Electrospun Nanofibers”, Reactive and Functional Polymers, vol. 73, pp.674-682, March 2013. 34- (*) M. EROL and E. CELIK, “Graphite Flake-Carbon Black Reinforced Polystyrene Matrix Composite Films Deposited on Glass Fiber Woven Fabrics as Plane Heaters”, Materiali in Tehnologije/Materials and Technology, vol. 47, pp. 25-28, March 2013. 35-(*) Y. ÖZTURK, M. EROL, E. ÇELİK, Ö. MERMER, G. KAHRAMAN and I. AVGIN, "Structural and Magnetic Properties of Cerium-doped Yttrium Iron Garnet Thin Films Prepared on Different Substrates Using Sol-gel Process", Materiali in Tehnologije/Materials and Technology, vol. 47, pp. 59-63, March 2013. 36-(*) M. EROL, O. SANCAKOGLU, M. YURDDAŞKAL, S. YILDIRIM and E. CELIK, “A Comparison on Physical, Structural and Photocatalytical Properties of TiO2 Nanopowders Produced Using Sol-gel and Flame Spray Pyrolysis”, International Journal of Applied Ceramic Technology, pp. 1-8, April 2013. 37-(*) O.CULHA, I. BIRLIK, M.TOPARLI, E. CELIK, S.ENGEL and B. HOLZAPFEL, “Characterization and Determination of Mechanical Properties YBCO Superconducting Thin Films with Manganese Using the TFA-MOD Method”, Materiali in Tehnologije/Materials and Technology, vol. 47, pp.153-160, April 2013. 38-(*) M.Z. ONGUN, K. ERTEKİN, C.G. HIZLIATES, O. OTER, Y. ERGUN and E. ÇELİK, “Determination of Hg (II) Subnanonolar Levels: A Comparative Study with Nanofibrous Materials and Continuous Thin Films”, Sensor & Actuators: B, Chemical, 2013 (in press). 39-(*) O. SANCAKOGLU, M.EROL, B. AGADAY and E. ÇELİK, “Electro-codeposited Cr-SiC Composite Coatings: Effect of Pulse Current Frequency on Morphology and Hardness”, Materiali in Tehnologije/Materials and Technology 2012 (in press). 40-(*) M.Z. ONGUN, O. OTER, G. SABANCI, K. ERTEKİN and E. ÇELİK, “Enhanced Stability of Ruthenium Complex in Ionic Luqid Doped Electrospun Fibers”, Sensor & Actuators: B, Chemical, 2013 (in press). 41- (*) M. ÖZDEMIR, A. SUSLU, Ü. COCEN, E. ÇELIK, “Effect of Viscosity on Production of Alumina Borate Nanofibers via Electrospinning Technique”, Materiali in Tehnologije/Materials and Technology 2012 (in press). 42-(*) A. ŞAKAR-DELIORMANLI, J.A. LEWIS, M. POLAT and E. CELIK, “Colloidal PMN Inks for Directed Assembly of 2D Arrays and 3-D Periodic Structures”, Journal of the European Ceramic Society, 2012 (in review). 43-(*) A. ŞAKAR-DELIORMANLI, E. CELIK and M. POLAT, “Pb(Mg1/3Nb2/3)O3 Inks for Direct Write Assembly of 3D Periodic Structures”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2012 (in review). 44-(*) R. YIGIT, E. CELIK, S. KOKSAL and F. FINDIK, “Performance of Multilayer Coated- and Uncoated- Carbide Tools When Turning Ductile Cast Iron”, International Tribology, 2012 (in review). 45-(*) A. ŞAKAR-DELIORMANLI, M. POLAT, E. CELIK and W. SIGMUND, “Pb(Mg1/3Nb2/3)O3 Inks for Direct Write Assembly of 3D Periodic Structures”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2012 (in review). 46-(*) H. HAVITCIOGLU, B. CECEN, I. INCI, A. PASINLI, M. YÜKSEL and E. CELIK, “Development of Hydroxyapatite Coated Materials and the Biomechanics Effects”, Journal of Orthopaedic Research, 2012 (in review). 47-(*) O. SANCAKOGLU, B. AGADAY and E. ÇELİK, “Fabrication of Sub-micron Al2O3 Ceramic Reinforced Zn Metal Matrix Composite Coatings by Electrodeposition Technique”, Canadian Metallurgical Quarterly, 2012 (in review). 48-(*) N.LKHAGVAJAV, M.KOIZHAIGANOVA, I.YAŞA, E.CELIK and O. SARI, “Characterization and Antimicrobial Performance of Nano Silver Coating on Leather Materials”, Digest Journal of Nanomaterials and Biostructures, 2012 (in review). 49-(*) H. HAVITCIOGLU, B. CECEN, A. PASINLI, M. YUKSEL, E. ÇELIK, H. YILDIZ, S. AKSOY and I. INCI, “Biomechanical and Histological Behavior of Ti6Al4V Alloy Substrates Coated with Calcium Phosphate using Lactic Acid-Na Lactate Buffered Body Fluid”, Journal of Biomedical Science, 2012 (in review). 50-(*) M. OZDEMIR, A. SUSLU, C. TEKMEN, E. CELIK and U. COCEN, “Fabrication of TiO2 Nanofibers by Electrospinning Technique for Photocatalytic Applications”, Canadian Metallurgical Quarterly, 2010 (in review). 51-(*) M.F. EBEOGLUGIL and E. CELIK, “The Processing and Characterization of Pb(Mg 1/3Nb2/3)O3 (PMN) Nano Scale Powders for Thin Film Capacitor”, Journal of Sol-gel Science and Technology, 2012 (in review). 52-(*) A.C. AKSIT, N. ONAR, E. ÇELİK, Y. ÇAYDAMLI and I. BIRLIK, “Flame Retardancy Properties of Cotton Fabrics Treated by Sol-Gel Process”, Journal Applied Polymer Science, 2012 (in review). 53-(*) M. EROL, M. BEKTAS, H. SÖZBİLEN, Ö. MERMER and E. CELIK, “Effects of Ru Substitution on the Microstructure and Optical Properties of Sol Gel Derived SnO2 Thin Films”, Material Characterization, 2012 (in review). 54-(*) H. YILMAZ ATAY and E. CELIK, “Investigation of Size Dependence of Flame Retardant Polymeric Composite Coatings/Paints Reinforced with Huntite and Hydromagnesite”, Journal of Composites, 2012 (in review). 55-(*) M.F. EBEOGLUGIL, S. DERINKUYU, A.K. HAMAMCI, I. BIRLIK, M. EROL, M. CAKMAKCI, M.N. DURAKBASA, G. BAS and E. CELIK, “V-TiO2 Films by Sol-gel Technique: Synthesis, Characterization and Photocatalytic Properties”, Journal of Materials Processing Technology (2nd International Conference on Quality andn Innovation in Engineering and Management 22-24 November, Cluj-Napoca Romania ), 2012 (in review). 56- (*) M. EROL, M. YURDDASKAL, S. YILDIRIM, Ö. MERMER, M. ÇAKMAKCI, M.N. DURAKBASA, and E. ÇELİK, Nano Scale TiO2 Powders via Flame Spray Pyrolysis:Synthesis, Properties and Photocatalytical Decomposition of Methylen Blue”, Journal of Materials Processing Technology (Kore), 2012 (in review). 57-(*) M. KAPLAN, M.F. EBEOGLUGIL, E. CELIK and E. AVCI, “Fabrication of New High Temperature Gd2O3-ZrO2 Insulation Coatings on Ag Tapes by Sol-gel Technique for Magnet Technology”, J. Physics and Chemsitry of Solids, 2012 (in review). 58-(*) M. EROL, M. YURDDAŞKAL, S. YILDIRIM, O. SANCAKOGLU and E. CELIK, “A Comparison on Some Specific Properties and Photocatalytic Efficiencies of TiO2 Sub-micron Nanopowders Produced Using Flame Spray Pyrolysis and Sol-gel Processess”, International Journal of Applied Ceramic Technology, 2012 (submitted). 59-(*) E. CELIK, O. KALYONCUOGLU, M.F. EBEOGLUGIL and H. ASLAN, “ZnO Semiconducting Films on Glass Substrate by Sol-gel Technique for Gas Sensors”, Journal of Material Sciences, 2012 (submitted). 60-(*) M. KAPLAN, M.F. EBEOGLUGIL, R.YIGIT, E. CELIK and E. AVCI, “High Temperature Tb2O3-ZrO2 Insulation Coatings on Ag Tapes by Sol-gel Technique for Magnet Technology”, J. Metallic Materials, 2012 (in review). 61-(*) I. BIRLIK, E. CELIK, and B. HOLZAPFEL, “Flux Pinning Improvement of GdBCO Superconducting Thin Films with BaZrO3 Nanoparticles Prepared by Chemical Solution Deposition Method”, IEEE Transactions on Applied Superconductivity, 2011 (in review). 62-(*) M. KAPLAN, M.F. EBEOGLUGIL, I. BIRLIK, E. CELIK and E. AVCI, “Synthesis and Characterization of Sol–gel Derived Yb2O3-ZrO2 Insulation Coatings on Ag Tapes for Magnet Technology”, J. Ceramic Processing Research, 2012 (in review). 63-(*) M.F. EBEOGLUGIL and E. CELIK, “Sm doped Pb(Mg(1+x)/3Nb(2–x)/3)O3 Nano Scale Powders for Thin Film Capacitor Applications”, Advanced Engineering Materials, 2012 (in review). 64-(*) M.F. EBEOGLUGIL and E. CELIK, “Tb doped Pb(Mg1/3Nb2/3)O3 Nano Scale Powders for Thin Film Capacitor: Synthesis, Characterization and Application”, Journal of Sol-gel Science and Technology, 2012 (in review). 65-(*) C. GUNDOGDU, O. OTER, G. DEMİRYAS, Y. ERGUN and E. CELIK, “Photocharacterization of Newly Synthesized Carbozole Bearing Oxozolones and Emission Based Selective Response to Zinc Ions”, Journal of Spectroscopy, 2012 (in review). 66- (*) H. YILMAZ ATAY and E. CELIK, “Barium Hexaferrite Reinforced Polymeric Composite Coatings for Radar Absorbing Applications”, International Scholarly Research Network Journal, 2012 (in review). 67- (*) H. YILMAZ ATAY, I. YASA and E. CELIK, “Antibacterial Polymer Composite Coatings with Synthesized Silver Nanoparticles”, ISRN Polymer Science, 2012 (in review). 68-(*) E. SUBAŞI, M.Z. ONGUN, K. ERTEKİN, O. OTER, M.Y. ERGUN and E. ÇELİK, “Synthesis, Characterization, Catalytic Applications and Optical Sensing Properties of Palladium Complexes of Tetra Dentate Schiff Bases”, Inorganica Chimica Acta, 2013 (in review). 69-(*) O. SAYMAN, E. CELIK, Y. ARMAN and T. AKSOY, “Numerical Analysis of Residual Stresses in High Temperature ZrO2 Coatings on Ag Tape for Magnet Technologies”, Journal of Materials Processing Technology, 2012 (submitted). 70-(*) A. PASINLI, H. YILDIZ, E. CELIK and S. AKSOY, “Mechanical Properties of Ca-P Coatings on Ti6Al4V Implant Materials by Biomimetic Method”, Tribology International, 2012 (submitted). 10.1.2.Ulusal Araştırma Makaleleri 11- A. SUSLU, M. OZDEMIR, C. TEKMEN, E. CELIK and U. COCEN, “Fabrication and Characterization of Ag doped TiO 2 Nanofibers by Electrospinning Method”, Anadolu University Journal of Science and Technology, vol. 10, pp. 277-284, June 2009. 12- O. SANCAKOGLU, M. EROL and E. CELIK, “The Science of Our Age: Nanotechnology”, Machine Specialization, vol. 68, pp. 35-38, July 2009. 13- R. YİĞİT, F. FINDIK and E. ÇELİK, “Performance of Multilayer Coated Carbide Tools When Turning Cast Iron”, Turkish Journal of Engineering and Environmental Sciences, vol. 33, pp.147-157, December 2009. 14- A.ŞAKAR-DELİORMANLI, E. ÇELİK and M. POLAT, “Factors Affecting the Drying Behaviour of Ceramic Films”, Afyon Kocatepe University Journal of Science, 100-105, December 2009. 15- A.ŞAKAR-DELİORMANLI, E. ÇELİK and M. POLAT, “Near Net Shape Fabrication of Ceramic Suspension Droplets”, Afyon Kocatepe University Journal of Science, 155-160, December 2009. 17- A.ŞAKAR-DELİORMANLI, E. ÇELİK and M. POLAT, “Investigation The Drying Behaviour of Ceramic Suspension Droplets”, Afyon Kocatepe University Journal of Science, 273-277, December 2009. 18- R. YİGİT, S. YILDIRIM and E. ÇELIK, “The Improvement of Metal Cutting Processing Using Al 2O3 Nanoparticles”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press). 19- M. BEKTAŞ, I. BİRLİK, A.N. ÖZCİVAN and E. ÇELİK, “Production and Characterization of BaIrO3 Doped Superconducting YBCO Thin Films by TFA-MOD Method”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press). 20- R. YIĞIT, S. YILDIRIM and E. ÇELIK, “Investigation of the Effect of CuO Nanofluid in Minimum Quantity Lubrication Machining”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press). 21-S. ELBEYLİ, M. EROL, I. BİRLİK, M.F. EBEOĞLUGİL, Ö. MERMER, R. YİĞİT, S. TAŞ, M. TOPARLI ve E. ÇELİK, “Gaz Sensörleri İçin Sol-jel Yöntemiyle Cam Altlıklar Üzerine Cu:SnO 2 Filmlerin Üretilmesi ve Karakterizasyonu”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press). 22- E. ÇELIK, I. BIRLIK, M. BEKTAŞ, O. ÇULHA and M. TOPARLI, “Improvement of Flux Pinning Properties of YBCO Superconducting Films with BaMeO3 (Me:Zr, Mn, Hf and Ir) Perovskite Nanoparticles by TFA-MOD Technique”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press). 23- I. BİRLİK, E. ÇELİK and B. HOLZAPFEL, “GdBaCuO Ceramic Superconducting Films Prepared by Chemical Solution Deposition Method”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press). 24- S. YILDIRIM ve E. ÇELİK, “Alev Geciktirici Huntit ve Hidromanyezit Nanopartikül Takviyeli Polimerik Kompozit Kaplamalar”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press). 25- M. EROL, Ç.G. BAŞKURT, G. ÖNER, A. PALA İYİLİKÇİ ve E. ÇELİK, “Su Bazlı Metilen Mavisi Çözeltisinin Fotokatalitik Parçalanması İçin K2La2Ti3O10 Filmlerin Üretimi”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press). 26- S. YILDIRIM, M. YURDDAŞKAL, B. ÖZTÜRK, T. BATAR ve E. ÇELİK, “Bir Katalizör Malzeme Olarak Grafen Üretimi İçin Alev Sprey Piroliz Yöntemiyle Nanoboyutlu MgO Tozlarının Sentezi ve Özellikleri”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press). 27- M. ÖZDEMİR KÖKLÜ, F. SÜMER, Ö. MERMER, S. OKUR, Ü. CÖCEN and E. ÇELİK, “Gas and Humidity Sensing Properties of Pure and Ru-Doped TiO2 Nanofibers”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press). 28- A.N. ÖZCİVAN, I. BİRLİK, M. BEKTAŞ ve E. ÇELİK, “STO Altlık Üzerine Üretilen YBCO Kaplama İçin Kullanılan PLD Sisteminde Yapılan Parametre Düzenlemeleri ve Karakteristik Verifikasyonu”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press). 29- M. F. EBEOĞLUGİL and E. ÇELİK, “New Insight on Pb(Mg1/3Nb2/3)O3 Nano Scale Powders for Thin Film Capacitor”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press). 30- E. ÇELİK, I. BİRLİK and Y.S. HASCİCEK, “Synthesis and Characterization of Pr 2O3 Buffer Layers by Sol-Gel Process for YBCO Surface Coated Conductors”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press). 31- Ö. MERMER, M. EROL, M. BEKTAŞ ve E. ÇELİK, ”The Effect of Ru Substitution on the Electrical and Humidity Sensor Properties of Semiconductor Tin Oxide Film”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press). 32- N.F. AK AZEM, I. BIRLIK, R. YIĞIT, M. EROL, S. YILDIRIM ve E. ÇELIK, “Preparation and Characterization of SiO 2 Nanofluid by Flame Spray System for Machining Process”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press). 33- S. TAŞ, M. EROL, M. TOPARLI ve E. ÇELİK, “Magnetron Saçtırma Tekniğinde Kullanılacak Olan Hedef Malzemeleri İçin SnO2 Tozların Sol-jel Yöntemi ile Üretilmesi”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press). 34- I. BİRLİK, N.F. AK AZEM, R. YİĞİT, M. EROL, S. YILDIRIM, M. YURDDAŞKAL, O. SANCAKOĞLU and E. ÇELİK, “Preparation and Characterization of TiO2 Nanofluid by Sol-gel Method for Cutting Tools”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press). 35- E. ÇAKIROĞLU, M. EROL, S. KOCAKUŞ and E. ÇELIK, “Synthesis of V, Er and Ce Substitued TiO2 Films via Sol-gel Method to Degrade Cyanide Content in Waste Water Under UV/Sunlight Source”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press). 36- I. KESKIN, E. OZKAN and E. CELIK, “TiO2 Based Photocatalitic Surfaces: Mechanism and Applications”, Machine Specialization, 2012 (in press). 37- A. ILERI, I. KAYATEKIN, O. CULHA, M.F. EBEOGLUGIL and E. CELIK, “Production and Characterization of Alumina Substrates for Gas Sensors”, J. Gazi University, Enginering and Architecture, 2012 (in press). 10.2. Bildiriler 10.2.1. Uluslarası Araştırma Bildirileri 65- N. LKHAGVAJAV, I. YAŞA, E. CELIK and O. SARI, “Antibacterial Effects of Colloidal Nano Silvers on Leather”, 1. International Leather Engineers Symposium, pp. 187-194, Izmir, Turkey, April 2009. 66- I.BIRLIK, E. CELIK, B. HOLZAPFEL, L. SCHULTZ, “Flux Pinning Improvement of YBCO Superconducting Films with BaZrO3 Nanoparticles Prepared by Chemical Solution Deposition Method”, 2nd Dresden-Karlsruhe Seminar on Materials and Applications in Superconductivity, Colditz, Germany, May 2009. 67- A. GURBUZ, N. ONAR, A. AKSIT, E. CELIK and I. OZDEMIR, “Structural, Thermal and Magnetic Properties of Mn, Cu, Co and X (X=Sr and Ni) Subsituted-Barium Ferrite Powders Prepared by Sol-Gel Method”, 5th Nanoscience and Nanotechnology Conference- NanoTr-5, pp. 194, Eskişehir, Turkey, June 2009. 68- M.F. EBEOGLUGIL and E. CELIK, “The Processing of Pb(Mg1/3Nb2/3)O3 (PMN) Nano Scale Powders for Thin Film Capacitor Coatings”, 5th Nanoscience and Nanotechnology Conference- NanoTr-5, pp. 302, Eskişehir, Turkey, June 2009. 69- H. ATAY YILMAZ and E. CELIK, “Use of Huntite and Magnetite Minerals in Plastics as a Flame Retardant”, 5th Nanoscience and Nanotechnology Conference- NanoTr-5, pp. 368, Eskişehir, Turkey, June 2009. 70- O. SANCAKOGLU, M. EROL and E. CELIK, “Nanoindentation Study on Co-deposited Nano-scale Ceramic Powders with Metals via Electrodeposition System”, 5th Nanoscience and Nanotechnology Conference- NanoTr-5, pp.418, Eskişehir, Turkey, June 2009. 71- I. BİRLİK, E. ÇELİK, M. ERBE and B. HOLZAPFEL, “The Zr-doped REBCO Films Grown by TFA-MOD Method”, International Conference on Superconductivity and Magnetism (ICSM 2010), Antalya, Turkey, April 2010. 72- H. YILMAZ ATAY and E. ÇELİK, ”Investigations of Radar Absorbing Activity of Barium Hexaferrite Reinforced Polymer Composite Coatings”, International Conference on Superconductivity and Magnetism (ICSM 2010), Antalya, Turkey, April 2010. 73- A. PASİNLİ, O. CULHA, E. CELİK and M. TOPARLI, “A Model for the Calculation of Mechanical Properties of Hydroxyapatite Coatings on Ti6Al4V Substrate Using Finite Element Methods”, 1st International Symposium of Computing Science and Engineering, Kuşadası, Aydın, Turkey, June 2010. 74- M. TOPARLI, A. PASİNLİ, H. YILDIZ, E. CELİK and R.S. AKSOY, “Synthesis of Hydroxyapatite Coatings on Ti6Al4V Substrate by Biomimetic Method”, 2nd International Symposium on Sustainable Development, pp.275-282, Sarjevo, Bosnia and Herzegovina, June 2010. 75-O. SANCAKOĞLU, M. EROL, M. C. ERTAN, B. AGADAY and E. ÇELİK, “Enhanced Wear Performance of SiC/Al2O3 Nano-Powder Reinforced Composite Coatings”, 6th Nanoscience and Nanotechnology Conference, pp. 176, İzmir, Turkey, June 2010. 76- I. BİRLİK, B. HOLZAPFEL and E. ÇELİK, “Nanoparticle Doped YBCO Films Prepared by Chemical Solution Deposition Method”, 6th Nanoscience and Nanotechnology Conference, pp. 221, İzmir, Turkey, June 2010. 77- M. BEKTAŞ, M. EROL, O. SANCAKOĞLU, M. F. EBEOĞLUGİL and E. ÇELİK, “Effect of Ru and Al Substitutions on Sol-Gel Derived ZnO Thin Films”, 6th Nanoscience and Nanotechnology Conference, pp. 282, İzmir, Turkey, June 2010. 78- M. BEKTAŞ, M. EROL, O. SANCAKOĞLU, M.F. EBEOĞLUGİL, H. SÖZBİLEN, Ö. MERMER and E. ÇELİK, “Structural, And Electrical Properties of Ru Doped ZnO Film Fabricated By Sol-Gel Technique And Using For Gas Sensing”, 6th Nanoscience and Nanotechnology Conference, pp. 339, İzmir, Turkey, June 2010. 79-M. ÖZDEMİR, A. SÜSLÜ, Ü. CÖCEN and E. ÇELİK, “Fabrication of Alumina Borate Nanofiber by Electrospinning Technique”, 6th Nanoscience and Nanotechnology Conference, pp. 374, İzmir, Turkey, June 2010. 80- M. ZEYREK, K.ERTEKİN, M. GÖÇMENTÜRK, Y. ERGÜN, M.ÖZDEMİR and E.ÇELİK, “Ionic Liquid Doped Electrospun Polymer Composite Fibers for Copper (II) Sensing”, 6th Nanoscience and Nanotechnology Conference, pp. 395, İzmir, Turkey, June 2010. 81-Y. ÖZTÜRK, M. EROL, E.ÇELİK and İ. AVGIN, “Cerium-Doped Yttrium Iron Garnet Thin Films with Nano Regions Prepared by Sol-Gel Method”, 6th Nanoscience and Nanotechnology Conference, pp. 412, İzmir, Turkey, June 2010. 82- H. SÖZBİLEN, M. EROL, M. F. EBEOĞLUGİL, M. BEKTAŞ, O. SANCAKOĞLU, Ö. MERMER, E. ÇELİK, “Influence of Al Incorporation on the Structural and Optical Properties of Semiconductor Tin Oxide Film on Glass Substrate by Sol-Gel Technique and Potential Application of Gas Sensors”, 6th Nanoscience and Nanotechnology Conference, pp. 430, İzmir, Turkey, June 2010. 83- M. EROL, M. BEKTAŞ, O. SANCAKOĞLU, M. F. EBEOĞLUGİL , H. SÖZBİLEN, Ö. MERMER, and E. ÇELİK, “The Effect of Ru Substitutions on the Structural, Electrical and Optical Properties of Semiconductor Tin Oxide Film Derived by SolGel Method”, 6th Nanoscience and Nanotechnology Conference, pp. 431, İzmir, Turkey, June 2010. 84- H. YILMAZ ATAY, İ. YAŞA and E. ÇELİK, “Synthesis of Ag Nanoparticles and Investigations of Their Antibacterial Activity in the Polymer Composite Coatings“, 6th Nanoscience and Nanotechnology Conference, pp. 506 İzmir, Turkey, June 2010. 85-H. YILMAZ ATAV and E. ÇELİK, “Electrical Behaviours of Flame Retardant Huntite and Hydromagnesite Reinforced Polymer Composites for Cable Applications” 6th Nanoscience and Nanotechnology Conference, pp. 715, İzmir, Turkey, June 2010. 86- S. KAÇMAZ, K.ERTEKİN, Y. ERGÜN, A. SÜSLÜ and E.ÇELİK, “Fluorecence Based Hg(II) with Electrospun Nanofibers”, 6th Nanoscience and Nanotechnology Conference, İzmir, Turkey, June 2010. 87- H. YILMAZ ATAY and E.ÇELİK, “Barium Ferrite Nanopowder Reinforced Polymeric Composites for Radar Absorbing Materials”, International Conference on Nanoscale Magnetism (ICNM-2010), pp. 212, Gebze, Turkey, October 2010. 88- O.CULHA, M. TOPARLI, E. CELİK, H. GÜZELAYDIN and T. AKSOY, “Extraction of the Mechanical Properties of HVOF Sprayed WC-based Cermet Coatings via Instrumented Sharp Indentation Analysis”, 13th International Materials Symposium (IMSP 2010), pp.92, Denizli, Turkey, October 2010. 89- H. YILMAZ ATAY and E.ÇELİK, “Investigation of Antibacterial Activity of Chitosan in a Dye Material as an Antibacterial Coating”, 13th International Materials Symposium (IMSP 2010), pp.114, Denizli, Turkey, October 2010. 90- M.F. EBEOGLUGIL, O. ÇULHA, E. CELIK and M. TOPARLI, “Production and Indentation Analysis of Pb(Mg1/3Nb2/3)O3 Capacitor Coatings”, 13th International Materials Symposium (IMSP 2010), pp.172, Denizli, Turkey, October 2010. 91-H. SÖZBİLEN, M.EROL, M. BEKTAŞ, Ö. MERMER and E. CELIK, “Structural, Electrical and Optical Properties of Semiconductor Ru-SnO2 Films Derived by Sol-gel Method and Humidity Sensor Application”, 7th Nanoscience and Nanotechnology Conference İstanbul, Turkey, June 2010. 92- K. ERTEKİN, S. KAÇMAZ, A. SÜSLÜ, M. ERGUN, M. GÖÇMENTÜRK, E. ÇELİK and U. CÖCEN, “A Novel Flourescent Queching Based Fe(III) Nanosensor Prepared By Electrospinning”, Molecular Sensors and Molecular Logic Gates Conference, Antalya, Turkey, October 2010. 93- M. ZEYREK, K. ERTEKİN, A. SÜSLÜ, E. CELİK and U. CÖCEN, “Ionic Liquid Doped Electrospun Polymer Composite Nanofibers For Hg(II) Sensing”, Molecular Sensors and Molecular Logic Gates Conference, Antalya, Turkey, October 2010. 94- M. ZEYREK, K. ERTEKİN, S. AYDOĞDU, Ö. HAKLI, S. İÇLİ, A. SÜSLÜ, E. CELİK and U. CÖCEN, “Flourescence Based Ag(I) Sensing With Electrospun Nanofibers”, Molecular Sensors and Molecular Logic Gates Conference, Antalya, Turkey, October 2010. 95- K.ERTEKİN, M.ZEYREK, M. OZDEMİR, A. SÜSLÜ and E.CELİK, “Electrospun Polymer Composite Fibers For Oxygen Sensing”, X. Europen Conference on Optical Chemical Sensors and Biosensors, Prague, Czech Republic, March 2010. 96- Y. BABUR, A. TUMBUL, H.I. MUTLU and E. ÇELİK, “Dielectric Properties of Thin Films”, 29th International Physics Congress, Bodrum, Turkey, September 2012. 97- M.EROL, M. YURDDAŞKAL, Ö. MERMER and E. ÇELİK, “Graphite Nanoparticles Reinforced Polymeric Nanocomposites for Flexibles temperature Sensors”, 8th Nanoscience and Nanotechnology Congress, Ankara, Turkey, June 2012. 98- M. YURDDAŞKAL, S. YILDIRIM, M.EROL and E. ÇELİK, “Production and Characterization of Fe2O3 Nanoparticles via Flame Spray Pyrolysis”, 8th Nanoscience and Nanotechnology Congress, Ankara, Turkey, June 2012. 99- M.Z. ONGUN, K. ERTEKİN, C. GÜNDOĞDU, Ö. ÖTER, Y. ERGUN and E. ÇELİK, “Determination of Silver (I) , Iron (III), Mercury Ions at Nanomolar and/or Sub-nanomolar Levels with Nanofibrous Materials and Continous Thin Films”, 8th Aegan Analytic Chemistry Days, pp. 151, Urla, İzmir, Turkey, September 2012. 100- S. KAÇMAZ, K. ERTEKİN, Ö. ÖTER, C. GÜNDOĞDU, Y. ERGUN and E. ÇELİK, “A Nano-scale Fluorescent pH Sensor for Alkaline Reagion”, 8th Aegan Analytic Chemistry Days, Urla, İzmir, Turkey, September 2012. 101- M. Z. ONGUN, K. ERTEKIN, S. AYDOGDU, D. MERCAN, O. OTER, E. CETINKAYA and E. CELIK, “Intensity and Lifetime Based Sensing of Fe (III) with Electrospun Nanosensors”, 8th Aegan Analytic Chemistry Days, pp. 42, Urla, İzmir, Turkey, September 2012. 102- M. Z. ONGUN, K. ERTEKIN, L. GUNDOGDU, O. OTER, Y. ERGUN and E. CELIK, “Multiple Sensing of Fe (III) and Hg (II) with Embedded Carbazole Derivatives”, 8th Aegan Analytic Chemistry Days, pp. 40, Urla, İzmir, Turkey, September 2012. 103- M.Z. ONGUN, K. ERTEKİN, M. GÖÇMENTÜRK, O. OTER, Y. ERGÜN and E. CELİK, “Selective Sub-nanomolar Determination of Fe (III) Ions with Electrospun Nanofibers”, 8th Aegan Analytic Chemistry Days, pp. 16-20, Urla, İzmir, Turkey, September 2012. 104- G. SABANCI, O. OTER, P. KOSE, E. SUBASI, K. ERTEKIN, H. TEMEL and E. CELIK, “Characterization of Novel Fluorescent Palladium Complexes by Steady State and Time Resolved Fluorescence Spectroscopy”, 8th Aegean Analytical Chemistry Days, pp.2, 138, 16-20 September 2012, Urla, İzmir, Turkey. 105- S. KACMAZ, K. ERTEKIN, D. MERCAN, O. OTER , E. CETİNKAYA and E. CELİK, “Design of a Nano-Scale Fluorescent Optical Chemical Sensor for Ca (II)”, 8th Aegean Analytical Chemistry Days, pp.3 43, 189,16-20 September 2012, Urla, İzmir, Turkey. 106-S. KACMAZ, K. ERTEKIN, D. MERCAN, O. OTER, E. CETİNKAYA and E. CELİK, “A Novel Fluorescent Nanosensor for Picomolar Determination of Cu (II)“, 8th Aegean Analytical Chemistry Days, pp. 3 41, 187, 16-20 September 2012, Urla, İzmir, Turkey. 107- R. AZRAK, K. ERTEKIN, O. OTER, M.Y. ERGÜN and E. CELIK, “Optical Chemical Nano-sensor for Picomolar Sensing of Fe (III) Ions”, 8th Aegean Analytical Chemistry Days, 16-20, pp. 3 50, 196, September 2012, Urla, İzmir, Turkey. 108- R. AZRAK, K. ERTEKIN, O. OTER and E. CELIK, “Fluorescence Lifetime Based Sensing Attempt Exploiting HPTS in Form of Nano-fibers”, 8th Aegean Analytical Chemistry Days, pp. 3 51, 197,16-20 September 2012, Urla, İzmir, Turkey 109- S. KACMAZ, O. OTER, K. ERTEKIN, D. MERCAN, E. CETINKAYA and E. CELIK, “A Nano-Based Fluorescent Optical Chemical Sensor for Cu (II) Ions”, NanoTR-9: 9. Nanoscience and Nanotechnology Conference, Book of Abstracts, pp. 445, 24-28 June 2013, Erzurum, Turkey. 110- S. KACMAZ, O. OTER, K. ERTEKIN, C.G. HIZLIATES, M.Y. ERGUN and E. CELIK, “Multi-functional Fluorescent Nanosensor for pH and Ag (I) ions”, NanoTR-9: 9. Nanoscience and Nanotechnology Conference, Book of Abstracts, pp. 45224-28 June 2013, Erzurum, Turkey. 111- S. KACMAZ, O. OTER, K. ERTEKIN, C.G. HIZLIATES, M.Y. ERGUN and E. CELIK, “A Nano-based Optical Sensor for pH/Ag(I) ions prepared by Electrospinning”, NanoTR-9: 9. Nanoscience and Nanotechnology Conference, Book of Abstracts, pp.446, 24-28 June 2013, Erzurum, Turkey. 112- M.EROL, O. SANCAKOĞLU, M. YURDDAŞKAL, S. YILDIRIM and E. ÇELİK, “Sol-gel and Flame Spray Pyrolysis Assisted TiO2 Nanopowders: Production, Characterization and Photocatalytical Kintetics”, 1st International Porous and Powder Materials Symposium & Exhibition, Book of Abstracts, pp.91, Izmir, Turkey, 3-6 September 2013. 113- S. YILDIRIM, E. ÇELİK and E.B. ERTUŞ, “Usage of Flame Retardant Nanopwder in Paints”, 1st International Porous and Powder Materials Symposium & Exhibition, Book of Abstracts, pp.115, Izmir, Turkey, 3-6 September 2013. 114- S. YILDIRIM, T. DİKİCİ, O. ÖTER, K. ERTEKİN and E. ÇELİK, “Structural and Photoluminescent Properties of CeO 2 and Eu+3/Sm+3 Doped CeO2 Nanopowders Prepared by Sol-Gel Method”, 1st International Porous and Powder Materials Symposium & Exhibition, Book of Abstracts, pp.121, Izmir, Turkey, 3-6 September 2013. 115- E.B. ERTUŞ, S. YILDIRIM and E. ÇELİK, “Sol-gel Synthesis and Characterization of BaFe12O19 as a Radar Absorbing Material”, 1st International Porous and Powder Materials Symposium & Exhibition, Book of Abstracts, pp.123, Izmir, Turkey, 3-6 September 2013. 116- E.B. ERTUŞ and E. ÇELİK, “Sol-gel Synthesis and Characterization of SrAl14O25: Eu+3/Dy+3 Powder for Afterglow Painting Applications”, 1st International Porous and Powder Materials Symposium & Exhibition, Book of Abstracts, pp.123, Izmir, Turkey, 3-6 September 2013. 117- N. ALTUĞ KAHRAMAN, F. BAKAL, M. EROL, G. KURŞUN, A. PALA and E. ÇELİK, “Production, Characterization and Photocatalytical Kintetics of Sol-gel Derived K2La2Ti3O10 Powders”, 1st International Porous and Powder Materials Symposium & Exhibition, Book of Abstracts, pp.129, Izmir, Turkey, 3-6 September 2013. Not: (*) Makalelerin SCI’de yayınlandığını ve yayınlanacağını göstermektedir. 10.3. Ulusal Konferans Bildirileri 3- E. CELIK, O. KALYONCUOGLU, M.F. EBEOGLUGIL and H. ASLAN, “ZnO Semiconducting Films on Glass Susbtrate by Sol-gel Technique for Gas Sensors”, I. Ulusal Metal, Yarıiletken ve Oksit Materyallerin Üretiminde Kullanılan Sistemler ve Analiz Teknikleri Kongresi, Eskişehir, Turkey June 2009. 4- M. EROL, O. SANCAKOĞLU, E. ÇELİK, “İzmir Sanayisi Kirli Su Örneklerinin Sol-jel Yöntemi ile Üretilmiş Fotokatalitik Özellik Gösteren Ru-TiO2 Kaplamalar Kullanılarak Organik İçerikçe Temizlenmesi I. Ulusal Metal, Yarıiletken ve Oksit Materyallerin Üretiminde Kullanılan Sistemler ve Analiz Teknikleri Kongresi, Eskişehir, Turkey June 2009. 5- H. ATAY YILMAZ, E. CELIK, “Alev Geçiktirici Olarak Plastiklerde Huntit ve Hidromanyezit Minerallerinin Kullanımı”, I. Ulusal Metal, Yarıiletken ve Oksit Materyallerin Üretiminde Kullanılan Sistemler ve Analiz Teknikleri Kongresi, Eskişehir, Turkey June 2009. 6- M. F. EBEOĞLUGİL, Ş. TURAN, E. ÇELİK, “Sol-jel Yöntemi Kullanılarak Kurşun Magnezyum Niyobat İnce Film Üretimi ve Karakterizasyonu”, I. Ulusal Metal, Yarıiletken ve Oksit Materyallerin Üretiminde Kullanılan Sistemler ve Analiz Teknikleri Kongresi, Eskişehir, Turkey June 2009. 7- E. ÇİNKILIÇ, M.Ç. GEBİZLİ, M. EROL, Y. ÖZTÜRK, İ. AVGIN, E. ÇELİK, “Ce0,1Y2,9Fe5O12 ve Ce0,1Yb0,05 Y2,85Fe5O12 Stokiometrisine Sahip Garnet Esaslı Manyeto-optik İnce Filmlerin Sol-jel Metodu Kullanılarak Üretilmesi ve Karakterizasyonu”, I. Ulusal Metal, Yarıiletken ve Oksit Materyallerin Üretiminde Kullanılan Sistemler ve Analiz Teknikleri Kongresi, Eskişehir, Turkey June 2009. 8- O. SANCAKOĞLU, M. EROL, B. AGADAY, E. ÇELİK, “Mikron-altı Al2O3 Seramik Takviyeli, Zn Metal Matriksli Kompozit Kaplamaların Elektrodepozitleme Tekniğiyle Üretimi”, I. Ulusal Metal, Yarıiletken ve Oksit Materyallerin Üretiminde Kullanılan Sistemler ve Analiz Teknikleri Kongresi, Eskişehir, Turkey June 2009. 9- O. SANCAKOĞLU, D. SADILLIOGLU, M.C. ERTAN, B. AGADAY, İ. ÖZDEMİR, E. ÇELİK, “Mikron-altı Boyutta Seramik Partiküllerin Cr Metali ile Elektrokimyasal Yöntemle Depozitlenmesi”, I. Ulusal Metal, Yarıiletken ve Oksit Materyallerin Üretiminde Kullanılan Sistemler ve Analiz Teknikleri Kongresi, Eskişehir, Turkey June 2009. 10- M. EROL, O. SANCAKOĞLU, E. ÇELİK, “Seramik Katkılarla Elde Edilen Polistren Matriksli Kompozit Kaplamaların Yanmaya Karşı Özelliklerinin İncelenmesi”, I. Ulusal Metal, Yarıiletken ve Oksit Materyallerin Üretiminde Kullanılan Sistemler ve Analiz Teknikleri Kongresi, Eskişehir, Turkey June 2009. 11- H. YILMAZ ATAY ve E. ÇELİK, “Mineral Katkılı Polimer Malzemelerin Yanmazlık ve Mekanik Özelliklerinin Araştırılması”, 3. Ulusal Polimer Bilimi ve Teknolojisi Kongresi, Kocaeli, Turkiye, Mayıs 2010. 12-O. ÇULHA, M.F. EBEOĞLUGİL, M. TOPARLI, E. ÇELİK, Ö. MERMER ve H.B. ÜNAL, “Seralarda Yarıiletken Sensör Teknolojisinin Kullanımı ve Üretim Olanakları” , I.Ulusal Sulama ve Tarımsal Yapılar Sempozyumu, Kahramanmaraş, Mayıs 2010. 13- M. ZEYREK, K. ERTEKİN, A. SUSLU, E. CELİK, E. SUBASI and H. TEMEL, “Kalay (II) Katyonunun Elektro-eğirme Yöntemi ile Hazırlanmış Fiberler ile Sub-nanomolar Düzeyde Tayini”, 24. National Chemistry Conference, Zonguldak, Turkey June-July 2010. 14-M. BEKTAŞ, I. BİRLİK, O. CULHA, M.TOPARLI and E. ÇELİK, “Synthesis and Characterization of BZO doped YBCO Superconducting Films with Different Type of Precursors”, 5th National Superconductivity Symposium, İzmir, 03-06 July 2011. 15- O. CULHA, I. BİRLİK, M. BEKTAŞ, A. H. GÜZELAYDIN, M.TOPARLI and E. ÇELİK, “Indentation Modelling of YBCO Based Thin Films”, 5th National Superconductivity Symposium, İzmir, 03-06 July 2011. 16- Y. BABUR, A. TUMBUL, H.I. MUTLU and E. ÇELİK, “Polimerik İnce Filmlerein Dielektrik Özellikleri”, 29. Uluslar arası Türk Fizik Derneği Konferansı, Temmuz 2012. 10.4. Davetli Makaleler 2-I. BIRLIK, O. CULHA, M. TOPARLI and E. CELIK, “Flux Pinning Propeties of YBCO Superconducting Films by TFAMOD Method”, 4. Ulusal Süperiletkenler Sempozyumu, Trabzon, 10-13 Ağustos 2009. 3- E. ÇELIK, I. BIRLIK, M. BEKTAŞ, O. ÇULHA and M. TOPARLI, “Improvement of Flux Pinning Properties of YBCO Superconducting Films with BaMeO3 (Me:Zr, Mn, Hf and Ir) Perovskite Nanoparticles by TFA-MOD Technique”, 8. Uluslararası Katılımlı Seramik Kongresi, Afyon, 22-24 Kasım, 2012. 4- E. ÇELIK, I. BIRLIK, M. BEKTAŞ, O. ÇULHA and M. TOPARLI, “Improvement of Flux Pinning Properties of YBCO Superconducting Films with BaMeO3 (Me:Zr, Mn, Hf and Ir) Nanoparticles by TFA-MOD Technique for Health Applications”, Biyo Nano Teknoloji Kongresi, Fatih Üniversitesi, İstanbul, 1-3 Ekim, 2013.