001-17Ykablo_tas.FH11
Transkript
001-17Ykablo_tas.FH11
31 31 31 109 110 111 112 113 114 115 116 117 118 119 TERMO-PLAST‹K ÖZEL BOYA (RODINO 50 ) Thermoplastic Coating (RODINO 50 ®) Çelik veya s›cak dald›rma galvaniz kaplanm›fl çelik üzerine TERMO-PLAST‹K özel boya (RODINO 50 ) uygulan›r. Asite karfl› mükemmel korozif koruma yapar. Tuz içeren, asit üretimi yapan, asitik ortam içeren, akü üreten, deniz suyunun içi gibi ortamlarda s›cak dald›rma veya paslanmaz malzemelerin ömrü de k›sad›r. Bu ortamlarda çelik veya s›cak dald›rma galvaniz kaplanm›fl çelik üzerine TERMO-PLAST‹K özel boya (RODINO 50 ) hem mukavemet hemde korozyon yönünden mükemmel koruma yapar. Asitli ortam›n TERMO-PLAST‹K özel boya (RODINO 50 ) ya karfl› etkisi çok azd›r. ‹letkenlerin kaçak ak›m, elektromekanik, frekans ve korozyondan do¤acak etkilerini absorve ederek sistemde oluflabilecek problemlerini ortadan kald›r›r. Teknik Bilgiler Uygulanmas› Gereken Boya Kal›nl›¤› 150-250 mikron Görselli¤i Düz/Gölgeli ISO 6272 Darbe Mukavemeti Çelik Tuz testi Aluminyum Kimyasal dayan›m› Direkt 23°C 2.7 Joule Endirekt 0°C 18.0 Joule -Çizilmifl 1000 saat testten sonra çizik etraf›nda 2-3 mm afl›nma meydana gelmifltir. -Çizilmemifl Afl›nma yok -Çizilmifl Afl›nma yok -Çizilmemifl Afl›nma yok 60 °C Asit ‹yi 60 °C Alkoli 60 °C Tuz ‹yi ‹yi 23 °C Solvent Zay›f Hava Koflullar› -40 °C ile + 80 °C Herhangi bir renk veya yap›sal de¤ifliklik yok. Yanma karakteristli¤i BS476 500 mikron boya Kolay deforme olmuyor. 120 Thermoplastic Coating (RODINO 50 ®) ® Thermoplastic Coating (RODINO 50 ) is applied on both hot dip galvanized surfaces on bare steel products. Perfect protection is gained against corrosion from acid. Even hot dip galvanised or stanisless steel products are not suitable for areas or plants which has a process with salt, manufactures acid, contains acidic products, manufactures ® batteries or for parts that are used under sea water. Thermoplastic Coating (RODINO 50 ) has aperfect protection against corrosion and offers better strength. ® Acidic surroundings has the minimum effect against special Thermoplastic Coating (RODINO 50 ) Prevents the problems that may be caused by of leak current, electromechanical effects and corrosion of the conductors. Technical Details Recommended Coating Thickness 150-250 microns Appearance (Smooth/Glossy) ISO 6272 Impact Strength Direct 23°C 2.7 Joules Indirect 0°C 18.0 Joules Scribed Results after 1000 hours. Loss of adhesion less than 10 mm from scribe. under film corrosion 2-3 mm. Steel Unscribed No loss of adhesion Scribed No loss of adhesion Unscribed No loss of adhesion 60 °C Acids Good 60 °C Alkali Good 60 °C Salts - except peroxides Good 23 °C Solvents Poor Salt Spray Aluiminium Chemical Resistance Weathering -40 °C and + 80 °C Burning Characteristics BS476 500 Micron Coating No significant change in colour or loss of gloss. Not easily ignitable 121 122 123 124 GD-5 D GD-10 D GD-20 D GD-30 D GD-40 D GD-50 D GD-60 D 1601005019140 1601010029140 1601020029140 1601030039140 1601040039140 1601050039140 1601060039140 54 104 205 305 405 506 606 54 104 205 305 405 506 606 1.5 1.5 1.5 2 2 2 2 0.95 1.52 3.03 4.28 5.78 7.53 GD-5 300R D GD-10 300R D GD-20 300R D GD-30 300R D GD-40 300R D GD-50 300R D GD-60 300R D 1601305019140 1601310029140 1601320029140 1601330039140 1601340039140 1601350039140 1601360039140 54 104 205 305 405 506 606 54 104 205 305 405 506 606 1.5 1.5 1.5 2 2 2 2 1.84 2.80 5.25 7.02 9.04 11.04 GD-5 450R D GD-10 450R D GD-20 450R D GD-30 450R D GD-40 450R D GD-50 450R D GD-60 450R D 1601405019140 1601410029140 1601420029140 1601430039140 1601440039140 1601450039140 1601460039140 54 104 205 305 405 506 606 54 104 205 305 405 506 606 1.5 1.5 1.5 2 2 2 2 2.48 3.71 6.83 8.89 11.36 14.00 GD-5 600R D GD-10 600R D GD-20 600R D GD-30 600R D GD-40 600R D GD-50 600R D GD-60 600R D 1601605019140 1601610029140 1601620029140 1601630039140 1601640039140 1601650039140 1601660039140 54 104 205 305 405 506 606 54 104 205 305 405 506 606 1.5 1.5 1.5 2 2 2 2 3.11 4.62 8.42 10.93 13.69 16.69 125 126
Benzer belgeler
Teknik bilgi formları
5 minutes of application. Tool using a spatula or stick wetted with neutral soapy water within 5 minutes of application.
DetaylıSIGHT HEIGHT: 5 cm VITAL HEIGHT (for GEE): 4
7mm-08 Rem 280 Rem 7mm Rem Mag 7mm Rem Mag 7mm Rem Mag 7x64 Brenneke 30-30 Win 308 Win 308 Win 30-06 SPRG 30-06 SPRG 30-06 SPRG 300 WSM 300 WSM 300 Win Mag 300 Win Mag 300 Win Mag 300 WBY Mag 300 R...
Detaylı