Aerohive Mounting Instructions for Silhouette
Transkript
Aerohive Mounting Instructions for Silhouette
® Mounting Instructions for Silhouette- and Interlude-style Ceiling Rails The AH-ACC-BKT-SILINT-KIT contains two brackets that allow you to install Aerohive AP models with built-in mounting hardware to the rails of Interlude- and Silhouette-style dropped ceilings. Select the correct bracket for your ceiling type, attach it to the back of your AP, and then attach AP and bracket to the ceiling, as described in the following steps. Select the Appropriate Bracket Determine which bracket to use for your ceiling type. Each bracket is marked with an image of the rail shape. Match the shape on the bracket to the shape of your ceiling rail, as shown in Figure 1. Figure 1 Cross-section of brackets and ceiling rails Interlude-style bracket and rail /C A B B Silhouette-style bracket and rail G 0.6” (15 mm) A B 0.35” (8.8 mm) A B 0.3” (8.5 mm) 0.4” (10 mm) A Attach the Bracket to the Device 1. Attach the bracket to the back of the device with the Aerohive logo facing away from the device. as shown in Figure 2. 2. Slip the mount tabs on the device into the tab slots on the bracket, as shown in the following illustration. Aerohive Mounting Instructions for Silhouette- and Interlude-style Ceiling Rails 1 Aerohive Networks 3. Rotate the bracket until the clips snap into place, and the flanges fit securely underneath the edge of the bracket mount. Figure 2 Attach the bracket to the device The mount clip flanges fit under the inside corners of the mount clips Mount tab slot Mount clip Mount tab slot Mount tab Mount clip Mount tab Mount clip Slots for clip flanges under corners of mount clips Mount tab Attach the Bracket and Device to the Ceiling Rail 1. Hold the device upside down and slip the bracket tabs over the edges of the ceiling track. 2. Press the device gently against the ceiling track and rotate it until the mount clips click into place. 3. To remove the device, use a flat-blade screwdriver to press the mount clips away from the rail until they disengage. Rotate the device and work it gently away from the bracket. © 2015 Aerohive Networks, Inc. P/N 330137, Rev. A Aerohive is a U.S. registered trademark of Aerohive Networks, Inc. 2 Aerohive Mounting Instructions for Silhouette- and Interlude-style Ceiling Rails